On 05/02/2016 07:35 PM, Eric Sabotta wrote:
Mike,
I just did this with a ASR1001. I had to upgrade it to 8gb of ram (I got the
real Cisco stuff for ~ $500). Before the router would crash when loading the
tables.
Right now, I have full tables from two providers:
router1#show ip bgp summary
BGP router identifier 192.55.82.2, local AS number 4505
BGP table version is 11150622, main routing table version 11150622
582461 network entries using 144450328 bytes of memory
911730 path entries using 109407600 bytes of memory
148924/93298 BGP path/bestpath attribute entries using 36933152 bytes of memory
132977 BGP AS-PATH entries using 6043938 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 296835018 total bytes of memory
BGP activity 962568/380103 prefixes, 5155645/4243915 paths, scan interval 60
secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/PfxRcd
192.55.82.3 4 4505 2532914 1634867 11150622 0 0 3w0d
330377
192.55.82.4 4 4505 672950 1634865 11150622 0 0 3w0d
1
209.117.103.33 4 2828 1837130 48052 11150557 0 0 2w1d
581351
router1#show ip cef summary
IPv4 CEF is enabled for distributed and running
VRF Default
582527 prefixes (582527/0 fwd/non-fwd)
Table id 0x0
Database epoch: 2 (582527 entries at this epoch)
-Eric
But if I'm reading the above right, it looks like bgp is eating ~300mb
on your box.
BGP using 296835018 total bytes of memory
You would seem to have plenty of free ram. In my case, the ASR1002 doesn't have
upgradable memory anyways so I'm stuck.
Mike-
