Thanks for the replies, everyone! Much appreciated. I'm going to check out the Mikrotik CCR series out.
Cheers, Dave On Fri, Apr 15, 2016 at 1:18 PM, David Sotnick <sotnickd-na...@ddv.com> wrote: > Hello masters of the Internet, > > I was recently asked to set up networking at a VIP's home where he has > Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a > Comcast-supplied Juniper ACX-2100 router. > > Which customer router would you suggest for such a setup? It needs to do > IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also > supports IPv6). > > The customer pays for "2Gb" service (Comcast caps this at 2G+10% = > 2.2Gbps) and would like to get what he pays for (*cough*) by having the > ability to stream two 1Gbps streams (or at least achieve > 1.0Gbps). > > I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to > the customer switch, or replace the AV-integrator-installed Cisco SG300-52P > (Cisco switch with e.g. an EX-3300 with 10Gb uplinks). > > Thanks in advance for your suggestions. > > -Dave >
