It does support a path to use an external TCAM if vendors do that, and will support 1M+ entries. It will be more expensive and the datapath will be slower which will impact the performance a bit.
I think you’ll see this make its way into something like a 48x10G/4x100G (or 40G) type platform but we’ll see. Phil From: Colton Conor <colton.co...@gmail.com> Date: Tuesday, January 19, 2016 at 09:29 To: Phil B <bedard.p...@gmail.com> Cc: NANOG <nanog@nanog.org> Subject: Re: New Switches with Broadcom StrataDNX I was hoping this new Broadcom chip would be able to support enough routes to hold a full BGP table, and be used for something like cumulus linux. I have no need for 100G, but 10G and 40G on a platform with deeper buffers sounds nice. On Tue, Jan 19, 2016 at 1:01 AM, Phil Bedard <bedard.p...@gmail.com> wrote: The BCM88670 (Jericho) is what powers the new Cisco NCS55XX devices. The processor is linerate above around 100 bytes per packet without external TCAM, supports 256K IPv4/64K IPv6 FIB entries (or mixed amounts). These chips are being used for high scale 100G, the initial NCS5508 linecard is a 36x100G QSFP28 one. Juniper has chosen to use their own silicon for most of their dense 100G platforms, but you’ll see these chips used by pretty much everyone else I imagine at some point in the next year. Phil -----Original Message----- From: NANOG <nanog-boun...@nanog.org> on behalf of Colton Conor <colton.co...@gmail.com> Date: Sunday, January 17, 2016 at 18:15 To: NANOG <nanog@nanog.org> Subject: New Switches with Broadcom StrataDNX >Does anyone know when the switching and router vendors will release their >new models with the Broadcom BCM88370 and BCM88670 chips? It looks like >these chips could be used as a carrier grade router and/or metro E device. > >More information here: http://www.broadcom.com/press/release.php?id=s902223 > >and here: >http://www.nextplatform.com/2015/03/19/new-dune-chips-enable-heftier-switches/
