ASR1k doesn't have fixed TCAM like the 6500 and has a little more wiggle room, but it depends on the ESP you have installed. For example ESP 20 supports around 1,000,000 routes.
http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-450070.html?cachemode=refresh -Pete On Wed, May 7, 2014 at 6:45 PM, Shawn L <sha...@up.net> wrote: > Do the ASR1k routers have this issue as well? I searched around but > couldn't find any information. > > > > ---------- Forwarded message ---------- > From: Irwin, Kevin <kevin.ir...@cinbell.com> > Date: Wed, May 7, 2014 at 10:39 AM > Subject: Re: Getting pretty close to default IPv4 route maximum for > 6500/7600 routers. > To: "nanog@nanog.org" <nanog@nanog.org> > > > I¹m really surprised that most people have not hit this limit already, > especially on the 9K¹s, as it seems Cisco has some fuzzy math when it > comes to the 512K limit. > > Also make sure you have spare cards when you reload after changing the > scaling, those old cards don¹t always like to come back. > > On 5/6/14, 7:01 PM, "Larry Sheldon" <larryshel...@cox.net> wrote: > > >On 5/6/2014 10:39 AM, Drew Weaver wrote: > > > >> Just something to think about before it becomes a story the community > >> talks about for the next decade. > > > >Like we have for the last two? > > > > > >-- > >Requiescas in pace o email Two identifying characteristics > > of System Administrators: > >Ex turpi causa non oritur actio Infallibility, and the ability to > > learn from their mistakes. > > (Adapted from Stephen Pinker) > > The information transmitted is intended only for the person or entity to > which it is addressed and may contain confidential and/or privileged > material. Any review, retransmission, dissemination or other use of, or > taking of any action in reliance upon, this information by persons or > entities other than the intended recipient is prohibited. If you receive > this in error, please contact the sender and destroy any copies of this > document. >