+1 on the Cyclades (Avocent). We have about 8 of them spread across 3 data centers. We've used them for roughly 4-5 years. Won't say they are intuitive to set up, but once they are, they work well. Don't think I've seen one go down, but then again, they aren't subject to much change. Cost was pretty reasonable, but that's relative to your business/budget.
-CWB -----Original Message----- From: nanog-requ...@nanog.org [mailto:nanog-requ...@nanog.org] Sent: Wednesday, July 24, 2013 8:59 AM To: nanog@nanog.org Subject: NANOG Digest, Vol 66, Issue 60 Send NANOG mailing list submissions to nanog@nanog.org To subscribe or unsubscribe via the World Wide Web, visit http://mailman.nanog.org/mailman/listinfo/nanog or, via email, send a message with subject or body 'help' to nanog-requ...@nanog.org You can reach the person managing the list at nanog-ow...@nanog.org When replying, please edit your Subject line so it is more specific than "Re: Contents of NANOG digest..." Today's Topics: 1. 48V DC Terminal server recommendations (Jeremy Bresley) 2. Re: 48V DC Terminal server recommendations (William Herrin) 3. RE: 48V DC Terminal server recommendations (Warren Bailey) 4. Re: 48V DC Terminal server recommendations (Michael Brown) 5. Re: 48V DC Terminal server recommendations (Joe Hamelin) 6. Re: 48V DC Terminal server recommendations (Warren Bailey) 7. Re: 48V DC Terminal server recommendations (Ian Goodall) 8. Re: 48V DC Terminal server recommendations (david peahi) 9. Re: 48V DC Terminal server recommendations (Tim Jackson) 10. Re: 48V DC Terminal server recommendations (Jay Ashworth) ---------------------------------------------------------------------- Message: 1 Date: Wed, 24 Jul 2013 09:59:41 -0500 From: Jeremy Bresley <b...@brezworks.com> To: nanog@nanog.org Subject: 48V DC Terminal server recommendations Message-ID: <51efebdd.4010...@brezworks.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Looking for recommendations on a good terminal server to put into a telco colocate facility. Requirements: 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) -48V DC power USB/internal modem for OOB access NEBS Level 1 (or better) compliance. So far I've found Perle has several models that meet 3 out of 4, but none that meet all the requirements. The only OpenGear boxes we're seeing with DC power is a little 4 port unit and they don't mention NEBS compliance. Lantronix mentions DC power for their SLC line, but doesn't mention anything about NEBS compliance either. Anybody have any recommendations for one they've used that meets all 4 of those requirements? Thanks! Jeremy "TheBrez" Bresley b...@brezworks.com ------------------------------ Message: 2 Date: Wed, 24 Jul 2013 11:08:46 -0400 From: William Herrin <b...@herrin.us> To: Jeremy Bresley <b...@brezworks.com> Cc: nanog@nanog.org Subject: Re: 48V DC Terminal server recommendations Message-ID: <CAP-guGX2xHR-z4W=SbfjCa-jEgm+te7P=MoEv5sVmg68fL=f...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 On Wed, Jul 24, 2013 at 10:59 AM, Jeremy Bresley <b...@brezworks.com> wrote: > Looking for recommendations on a good terminal server to put into a > telco colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have > to) -48V DC power USB/internal modem for OOB access NEBS Level 1 (or > better) compliance. Hi Jeremy, Have you considered the obvious: a Cisco 2610/2811 or equivalent with a 16 port async NM card, an analog modem WIC card and a DC power supply? I didn't see it on the list of things you'd considered. Regards, Bill Herrin -- William D. Herrin ................ her...@dirtside.com b...@herrin.us 3005 Crane Dr. ...................... Web: <http://bill.herrin.us/> Falls Church, VA 22042-3004 ------------------------------ Message: 3 Date: Wed, 24 Jul 2013 15:14:53 +0000 From: Warren Bailey <wbai...@satelliteintelligencegroup.com> To: Jeremy Bresley <b...@brezworks.com>, "nanog@nanog.org" <nanog@nanog.org> Subject: RE: 48V DC Terminal server recommendations Message-ID: <f5wg5o0me19ke4h9frdxww4w.1374678888...@email.android.com> Content-Type: text/plain; charset="iso-8859-1" Uplogix. Sent from my Mobile Device. -------- Original message -------- From: Jeremy Bresley <b...@brezworks.com> Date: 07/24/2013 8:02 AM (GMT-08:00) To: nanog@nanog.org Subject: 48V DC Terminal server recommendations Looking for recommendations on a good terminal server to put into a telco colocate facility. Requirements: 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) -48V DC power USB/internal modem for OOB access NEBS Level 1 (or better) compliance. So far I've found Perle has several models that meet 3 out of 4, but none that meet all the requirements. The only OpenGear boxes we're seeing with DC power is a little 4 port unit and they don't mention NEBS compliance. Lantronix mentions DC power for their SLC line, but doesn't mention anything about NEBS compliance either. Anybody have any recommendations for one they've used that meets all 4 of those requirements? Thanks! Jeremy "TheBrez" Bresley b...@brezworks.com ------------------------------ Message: 4 Date: Wed, 24 Jul 2013 11:14:58 -0400 From: Michael Brown <mich...@supermathie.net> To: Jeremy Bresley <b...@brezworks.com> Cc: nanog@nanog.org Subject: Re: 48V DC Terminal server recommendations Message-ID: <51efef72.3010...@supermathie.net> Content-Type: text/plain; charset=ISO-8859-1 On 13-07-24 10:59 AM, Jeremy Bresley wrote: > Looking for recommendations on a good terminal server to put into a > telco colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have > to) > -48V DC power > USB/internal modem for OOB access > NEBS Level 1 (or better) compliance. > Avocent's (formerly Cyclades) ACS devices meet all of your constraints: http://www.emersonnetworkpower.com/documents/en-us/brands/avocent/documents/datasheets/01/acs6000-ds-en.pdf M. -- Michael Brown | The true sysadmin does not adjust his behaviour Systems Administrator | to fit the machine. He adjusts the machine mich...@supermathie.net | until it behaves properly. With a hammer, | if necessary. - Brian ------------------------------ Message: 5 Date: Wed, 24 Jul 2013 08:18:08 -0700 From: Joe Hamelin <j...@nethead.com> To: Jeremy Bresley <b...@brezworks.com> Cc: NANOG list <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations Message-ID: <cao0-hxbt5lvxkjlxm8_gh9ha0pzn5fvcrhpufuhoopskpx4...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 I guess Cyclades is now Avocent, used these at Clearwire. Can come with dual 48VDC supplies. Think of a 48 serial port Linux box. Has PCM/CIA slot for modem. Multiple users can be logged in at the same time. http://www.emersonnetworkpower.com/en-US/Products/InfrastructureManagement/SerialConsoles/Pages/AvocentACS6000AdvancedConsoleServer.aspx -- Joe Hamelin, W7COM, Tulalip, WA, 360-474-7474 On Wed, Jul 24, 2013 at 7:59 AM, Jeremy Bresley <b...@brezworks.com> wrote: > Looking for recommendations on a good terminal server to put into a telco > colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) > -48V DC power > USB/internal modem for OOB access > NEBS Level 1 (or better) compliance. > > So far I've found Perle has several models that meet 3 out of 4, but none > that meet all the requirements. The only OpenGear boxes we're seeing with > DC power is a little 4 port unit and they don't mention NEBS compliance. > Lantronix mentions DC power for their SLC line, but doesn't mention > anything about NEBS compliance either. > > Anybody have any recommendations for one they've used that meets all 4 of > those requirements? > > Thanks! > > Jeremy "TheBrez" Bresley > b...@brezworks.com > > ------------------------------ Message: 6 Date: Wed, 24 Jul 2013 15:31:55 +0000 From: Warren Bailey <wbai...@satelliteintelligencegroup.com> To: Joe Hamelin <j...@nethead.com>, Jeremy Bresley <b...@brezworks.com> Cc: NANOG list <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations Message-ID: <h6l2dk4n9wnycwx5nbxemmsb.1374679908...@email.android.com> Content-Type: text/plain; charset="iso-8859-1" We used these quite a bit. Uplogix has some interesting automation, and the phone line/OOB is pretty slick. One cool thing about uplogix is it has a surgical rollback feature. You can set many different conditions and rules, and the router will dutifully execute a fall back procedure automatically. We had a switch plugged in, and I did a port range and added "shut" to all of the ports. Once they all went down, uplogix noticed and after a pre defined time it went back in and restored to the last known good configuration. If these bells and whistles don't blow your skirt up, check out the website. Sent from my Mobile Device. -------- Original message -------- From: Joe Hamelin <j...@nethead.com> Date: 07/24/2013 8:23 AM (GMT-08:00) To: Jeremy Bresley <b...@brezworks.com> Cc: NANOG list <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations I guess Cyclades is now Avocent, used these at Clearwire. Can come with dual 48VDC supplies. Think of a 48 serial port Linux box. Has PCM/CIA slot for modem. Multiple users can be logged in at the same time. http://www.emersonnetworkpower.com/en-US/Products/InfrastructureManagement/SerialConsoles/Pages/AvocentACS6000AdvancedConsoleServer.aspx -- Joe Hamelin, W7COM, Tulalip, WA, 360-474-7474 On Wed, Jul 24, 2013 at 7:59 AM, Jeremy Bresley <b...@brezworks.com> wrote: > Looking for recommendations on a good terminal server to put into a telco > colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) > -48V DC power > USB/internal modem for OOB access > NEBS Level 1 (or better) compliance. > > So far I've found Perle has several models that meet 3 out of 4, but none > that meet all the requirements. The only OpenGear boxes we're seeing with > DC power is a little 4 port unit and they don't mention NEBS compliance. > Lantronix mentions DC power for their SLC line, but doesn't mention > anything about NEBS compliance either. > > Anybody have any recommendations for one they've used that meets all 4 of > those requirements? > > Thanks! > > Jeremy "TheBrez" Bresley > b...@brezworks.com > > ------------------------------ Message: 7 Date: Wed, 24 Jul 2013 16:34:55 +0100 From: Ian Goodall <na...@ijg.me.uk> To: Jeremy Bresley <b...@brezworks.com> Cc: nanog@nanog.org Subject: Re: 48V DC Terminal server recommendations Message-ID: <29beacc0-02eb-43bf-bf32-6935a1c5b...@ijg.me.uk> Content-Type: text/plain; charset=iso-8859-1 On 24 Jul 2013, at 15:59, Jeremy Bresley <b...@brezworks.com> wrote: > The only OpenGear boxes we're seeing with DC power is a little 4 port unit > and they don't mention NEBS compliance. Lantronix mentions DC power for > their SLC line, but doesn't mention anything about NEBS compliance either. Not sure about NEBS but we use the Opengear IM4200 range which meet your other requirements: http://opengear.com/product-im4200.html -48v and Cisco pinout available. I guess the small 4 port units you found were the ACM5000s. These come with an external transformer which is a pain to rack mount unlike the larger IM4200. Avocent were good when I used them a few years ago but very expensive. Ian ------------------------------ Message: 8 Date: Wed, 24 Jul 2013 08:49:25 -0700 From: david peahi <davidpe...@gmail.com> To: Jeremy Bresley <b...@brezworks.com> Cc: NANOG <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations Message-ID: <cae_atpo3qe8nmbgt0+c5ovj8ftqy8hrqaur2r7hmj-tcf8m...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 We have used the Avocent console/power terminal servers for several years. Although the browser interface is cluttered, and the use of Java sometimes poses connectivity challengesm Avocent is a useful console server for all types of devices, and has the ability to remotely power-cycle AC and DC devices. Avocent devices meet your specs (-48V PS, NEBS compliance). Regards, David On Wed, Jul 24, 2013 at 7:59 AM, Jeremy Bresley <b...@brezworks.com> wrote: > Looking for recommendations on a good terminal server to put into a telco > colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) > -48V DC power > USB/internal modem for OOB access > NEBS Level 1 (or better) compliance. > > So far I've found Perle has several models that meet 3 out of 4, but none > that meet all the requirements. The only OpenGear boxes we're seeing with > DC power is a little 4 port unit and they don't mention NEBS compliance. > Lantronix mentions DC power for their SLC line, but doesn't mention > anything about NEBS compliance either. > > Anybody have any recommendations for one they've used that meets all 4 of > those requirements? > > Thanks! > > Jeremy "TheBrez" Bresley > b...@brezworks.com > > ------------------------------ Message: 9 Date: Wed, 24 Jul 2013 08:52:35 -0700 From: Tim Jackson <jackson....@gmail.com> To: Jeremy Bresley <b...@brezworks.com> Cc: nanog list <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations Message-ID: <cak19y1ch71oionm02bomyopofdadv7iq6vncqphbmpwlfek...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Digi TS-16 Works well, but doesn't have USB/modem.. MRV's LX line meets all of that, but I've had mixed issues with reliability with them.. On Wed, Jul 24, 2013 at 7:59 AM, Jeremy Bresley <b...@brezworks.com> wrote: > Looking for recommendations on a good terminal server to put into a telco > colocate facility. > > Requirements: > 8-16 ports for Cisco console access (RJ-45s preferred, DB9s if we have to) > -48V DC power > USB/internal modem for OOB access > NEBS Level 1 (or better) compliance. > > So far I've found Perle has several models that meet 3 out of 4, but none > that meet all the requirements. The only OpenGear boxes we're seeing with > DC power is a little 4 port unit and they don't mention NEBS compliance. > Lantronix mentions DC power for their SLC line, but doesn't mention anything > about NEBS compliance either. > > Anybody have any recommendations for one they've used that meets all 4 of > those requirements? > > Thanks! > > Jeremy "TheBrez" Bresley > b...@brezworks.com > ------------------------------ Message: 10 Date: Wed, 24 Jul 2013 11:57:38 -0400 (EDT) From: Jay Ashworth <j...@baylink.com> To: NANOG <nanog@nanog.org> Subject: Re: 48V DC Terminal server recommendations Message-ID: <3437569.1986.1374681458084.javamail.r...@benjamin.baylink.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Jeremy Bresley" <b...@brezworks.com> > NEBS Level 1 (or better) compliance. Do you require NEBS "compliance" or the much more expensive still "NEBS certification"? Cheers, -- jra -- Jay R. Ashworth Baylink j...@baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274 End of NANOG Digest, Vol 66, Issue 60 ************************************* This message is private and confidential. If you have received it in error, please notify the sender and remove it from your system.
