http://datainterfaces.com/CWDM-DWDM-Solutions.aspx
Try these folks. Faisal On Feb 7, 2013, at 8:04 PM, Chuck Anderson <c...@wpi.edu> wrote: > Years ago I was able to purchase 2-Channel CWDM Plug-In 1-Wavelength > Optical Add/Drop Multiplexors from Finisar with SC/APC connectors on > them, even though they normally only make the SC/PC version shown > here: > > FWSF-OADM-1-xx-SC > > http://www.finisar.com/products/passives/MUX-DEMUX/CWDM_OADM-1_Plug-in_Module > > but they won't do the SC/APC version for me now. > > Does anyone know of a good alternative? There are lots of options for > modular/rack mount 2-Channel CWDM Add/Drops that have SC/PC or LC/PC > connectors made for data networks. There are also lots of options for > 1-Channel SC/APC or LC/APC modules made for CATV applications. But > I'm having trouble finding 2-Channel versions with APC connectors that > I can use with data equipment + CATV transmission on the same ring. > > I know I could combine two separate 1-Channel OADMs, but I prefer the > integrated, modular solution. A bonus would be to find an alternative > that fits in my existing Finisar 2-slot 1U chassis. > > In any case, I'm open to hearing about all options. Actually, I > already have the 1490nm OADM in the SC/PC version, and I suppose I > could cut off the connectors re-terminate with SC/APC and replace the > bulkhead connectors with the green ones. My preferred fiber > contractor doesn't have experience with terminating APC connectors > though. Is it that much harder to terminate the angled connectors? > > Thanks, > Chuck > >
