On Mon, Jan 28, 2013 at 9:54 PM, Owen DeLong <o...@delong.com> wrote: > > On Jan 28, 2013, at 10:03 , Joe Maimon <jmai...@ttec.com> wrote: > >> >> >> Eugeniu Patrascu wrote: >>> On Sat, Jan 26, 2013 at 11:26 AM, Pavel Dimow <paveldi...@gmail.com> wrote: >> >>> As being personally involved deploying IPv6 on an enterprise network, >>> here's how I did it (keeping in mind the fact that we have our own >>> ASN): >>> >> >> I suggest this be step 0 >> > > Yes. > >>> - get a /48 PI from the local LIR >> >> And this be step 1 >> > > No, this is step 2 and /48 is not necessarily the right answer. > > Step 1 is to evaluate your network and figure out your addressing needs. > > If you have a single corporate office and are not an ISP, then /48 is fine. > > If you have multiple locations, then a /48 per location is more appropriate. >
Yes, I know this is the rule, but right now we only have one location, so I got only a /48. One thing that I missed in my first e-mail, was to say that for each subnet I allocated a /64 as it works with most equipment and no funky netmasks. One of my ISPs is running /126 netmask on the border links and the other runs /64 - probably a matter of preference by their network admins. Eugeniu
