On 3/27/12 23:21 , Roberts, Brent wrote: > Is anyone running an E300 Series Chassis at the internet edge with multiple > Full BGP feeds? 95th percent would be about 300 meg of traffic. BGP session > count would be between 2 and 4 Peers. > 6k internal Prefix count as it stands right now. Alternative are welcome. > Thought about the ASR1006 but I need some local switching as well.
Doesn't support URPF which makes it unsuitable for RTBH and therefore customer or transit edge IMHO. I do use them and like them reasonably well for high density over-subscription 10Gb/s ports. Can get 280 2x oversubscribed 10Gb/s ports or 560 4x layer 3 out of an e1200i. > Full requirements include > Full internet Peering over GigE Links. > Fully Redundant Power > Redundant "Supervisor/Route Processor" > Would prefer a Small Chassis unit. (under 10u) > Would also prefer a single unit as opposed to a two smaller units. > > > ________________________________ > > This email and any attached files may contain confidential and/or privileged > material and is intended solely for the use of the person to whom it is > addressed. Any review, retransmission, dissemination or other use of or > taking of any action in reliance upon this information by persons or entities > other than the intended recipient is prohibited. If you received this in > error, please contact the sender immediately and delete it and all > attachments from your computer. Progressive Solutions is not liable for any > errors or omissions in the content or transmission of this email. >
