You couldn't use Titanium to judge/discuss the nexus family as a
whole either. Aside from 1KV, all the nexus products use ASIC
hardware specific to that platform/linecard and no NXOS software
emulator exists that mimics those behaviors.
2 cents,
Tim
At 09:34 AM 12/20/2011, Luan Nguyen gushed:
You can't use the software switch Nexus 1000V to judge/discuss the Nexus
family products N7K, N5K...etc as a whole?
Check out this discussion
<https://supportforums.cisco.com/thread/2054884>https://supportforums.cisco.com/thread/2054884
Titanium as they call the NX-OS simulator is not available to the public
though...
-Luan
On Tue, Dec 20, 2011 at 12:08 PM, -Hammer- <bhmc...@gmail.com> wrote:
> Bah. Look like I need more of an education on Nexus in general. Thanks for
> the easy pointer.
>
>
> -Hammer-
>
> "I was a normal American nerd"
> -Jack Herer
>
>
>
> On 12/20/2011 11:02 AM, Nick Hilliard wrote:
>
>> On 20/12/2011 13:55, -Hammer- wrote:
>>
>>
>>> I know we can't throw NX code on Dynamips but I figured I would ask the
>>> group anyway. We are starting to discuss Nexus platform options and I can
>>> only get so much from demo depot before our AM gets whiny. Is anyone
>>> currently emulating Nexus on anything that is open to the public?
>>>
>>>
>> nexus1k?
>>
>> Nick
>>
>>
>>
>>
>>
>>
>
Tim Stevenson, tstev...@cisco.com
Routing & Switching CCIE #5561
Distinguished Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.
