I did look at a Juniper J6350, and the documentation states it can handle 400k 
routes with 1GB of memory, or 1 million with 2GB.  However it doesn’t spell out 
how that is divvyed up between the two based on a profile setting or some other 
mechanism.
Chris

From: tsi...@gmail.com [mailto:tsi...@gmail.com]
Sent: Tuesday, March 08, 2011 4:33 PM
To: Chris Enger; 'nanog@nanog.org'
Subject: Re: Internet Edge Router replacement - IPv6 route table size 
considerations

have you looked into juniper networks?

----- Reply message -----
From: "Chris Enger" <chr...@ci.hillsboro.or.us>
Date: Tue, Mar 8, 2011 5:15 pm
Subject: Internet Edge Router replacement - IPv6 route table size considerations
To: "'nanog@nanog.org'" <nanog@nanog.org>

Greetings,

   I am researching possible replacements for our Internet edge routers, and 
wanted to see what people could recommend for a smaller chassis or fixed router 
that can handle current IPv4 routes and transition into IPv6.  Currently we 
have Brocade NetIron 4802s pulling full IPv4 routes plus a default route.  I've 
looked at Extreme, Brocade, Cisco, and a few others.  Most range from 256k - 
500k IPv4 and 4k - 16k IPv6 routes when CAM space is allocated for both.  The 
only exception I've found so far is the Cisco ASR 1002, which can do 125k v6 
along with 500k v4 routes at once.  I'm curious if any other vendors have 
comparable products.

My concern is trying to find a router (within our budget) that has room for 
growth in the IPv6 routing space.  When compared to the live table sizes that 
the CIDR report and routeviews show, some can't handle current routing tables, 
let alone years of growth.  BGP tweaks may keep us going but I can't see how 
16k or fewer IPv6 routes on a router is going to be viable a few years from now.

Thank you,
Chris Enger


Reply via email to