Or why not just paste a REALLY large bogus config in there to max-out
the NVRAM chip?  That's the one that's harder to move to a PC.

On the flash, moving to a PC is easier (at least if we're talking about
newer devices using PCMCIA!)  :)

I suppose that everyone's level of detail is somewhat equivalent to the
level of paranoia or level of desired protection along the way!

Scott

On 1/12/11 9:48 AM, Greg Whynott wrote:
> V
>
> ----- Original Message -----
> From: Greg Whynott
> Sent: Wednesday, January 12, 2011 09:46 AM
> To: 'timothy.gr...@mantech.com' <timothy.gr...@mantech.com>
> Subject: Re: Cisco Sanitization
>
> Replace the flash cards.  If you are really concerned about information being 
> disclosed,  formatting/deleting files will not destroy the data and it 
> probably can be recovered.   Or take the flash cards and scrub them from a pc.
>
> G
>
> ----- Original Message -----
> From: Green, Timothy [mailto:timothy.gr...@mantech.com]
> Sent: Wednesday, January 12, 2011 09:41 AM
> To: nanog@nanog.org <nanog@nanog.org>
> Subject: Cisco Sanitization
>
> Hey all!
>
> I'm currently creating a sanitization guide for all my hardware.  When I got 
> to my Cisco devices I noticed there are numerous ways to reset them back to 
> the default and clear the NVRAM.  Does anyone have a guide that includes 
> sanitization information for all Cisco devices(at least switches, routers, 
> IDS's, and ASA 5500 Series) so I don't have to recreate the wheel?
>
> Thanks,
>
> Tim
>
>
>
> --
>
> This message and any attachments may contain confidential and/or privileged 
> information for the sole use of the intended recipient. Any review or 
> distribution by anyone other than the person for whom it was originally 
> intended is strictly prohibited. If you have received this message in error, 
> please contact the sender and delete all copies. Opinions, conclusions or 
> other information contained in this message may not be that of the 
> organization.
>
>
>


Reply via email to