On Tue, 21 Sep 2010, Matthew Topper wrote:
Maybe I'm thinking about this the wrong way, but it seems to be that
that would be a huge problem when you need to change out a cable or
move something. Do the benefits outweigh the headaches with this kind
of setup?
Keeping the 'unseen' copper/fiber bundles neatly organized can actually
make those moves easier. If you have to replace a jumper, sure it means
taking some extra time to undo and re-do the velcro tape loops as you go,
but if done properly, it shouldn't add much extra time.
The argument could also be made that a properly run and dressed cabling
job would need to be touched less frequently, and by extension, is less
prone to physical failures that would require changing out a cable.
jms
On Tue, Sep 21, 2010 at 4:43 AM, Nick Hilliard <n...@foobar.org> wrote:
On 21/09/2010 06:07, Positively Optimistic wrote:
Do any of our fellow nanog members have experience with cable management
on
6509/6513 cisco switches? We're upgrading infrastructure in some of our
facilities,.. and until it came to cable management, the switches seemed
to
be a great idea... 8 48port blades.. pose a challenge.. or a problem..
courtesy of Richard Steenbergen:
http://cluepon.net/ras/betterfiber.jpg
Nick
