Hello -
On this same topic does anyone have any experience with the Linksys
WAP200E?
thanks and regards
Hugh
On 19 Jun 2009, at 20:19, Bret Clark wrote:
Justin Sharp wrote:
I didn't read through all of the replies to see if this was
suggested, apologies if it was.
http://www.solectek.com/products.php?prod=sw7k&page=feat
I implemented a PTP link at about 3 miles using these Solectek
radios. I get 40Mbps consistently with TCP traffic and ~100Mbps
UDP. This PTP link has literally been up for 3 years (in 2 weeks)
without failing. I live in a 4 seaons state, so its seen all sorts
of weather over those years. I have clean line of site down the
freeway for what its worth. Its natively powered via POE, power
injector included. We run all sorts of usual business application
over this link, including about 30 simultaneous VOIP channels, and
have not had one issue with stability. I was also told by the VAR
that sold us the product that a city nearby (can't remember which
one) connects all of its municipal buildings with Solectek stuff
and runs its VOIP infrastructure over it as well.
We run it in bridged mode with routers on each end, but it does
support some rudimentary L3 stuff, static routing and RIP.
IIRC, they were not "cheap" (couple of 1k), but for us have
definitely been much cheaper than private circuits from carriers of
comparable throughput capacity.
Hope its helpful.
--Justin
I have to say I did a double take on your speed claims. We use
Solectek all over the place and have yet to archived those speeds on
any of our links. Not only that Solectek engineers have told us that
at a 108mbps radio rate realistically you are only going to see only
35mbps data rate on link that's just a mile apart; further you go
the less bandwidth you will have.
Other then that, I agree they are nice radios and even include
heaters in them to help maintain temperatures above freezing during
winter time so that ice buildup doesn't cause a problem.
Bret
NB:
Have you read the reference manual ("doc/ref.html")?
Have you searched the mailing list archive (www.open.com.au/archives/radiator)?
Have you had a quick look on Google (www.google.com)?
Have you included a copy of your configuration file (no secrets),
together with a trace 4 debug showing what is happening?
Have you checked the RadiusExpert wiki:
http://www.open.com.au/wiki/index.php/Main_Page
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows, MacOS X.
Includes support for reliable RADIUS transport (RadSec),
and DIAMETER translation agent.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
-
CATool: Private Certificate Authority for Unix and Unix-like systems.
