My first question is how are you running 14 code on that hardware??
On Fri, Feb 11, 2022 at 20:12 Lyndon Nerenberg (VE7TFX/VE6BBM) <
lyn...@orthanc.ca> wrote:
> Nick Suan via NANOG writes:
> > I was actually interested to see if the EX series would let me do this,
> and i
> > t turns out that if STP is enabled on any of the switch interfaces, it
> won't:
> > tevruden@core-02# commit check
> > [edit protocols rstp]
> > 'interface'
> > XSTP : Interface ge-0/0/0.0 is not enabled for Ethernet Switching
> > error: configuration check-out failed
>
> Do you have any rstp-specific overrides in your config? E.g. we
> have things like this in some of ours:
>
> rstp {
> interface ge-0/0/45 {
> cost 1000;
> mode point-to-point;
> }
> interface ge-1/0/45 {
> cost 1000;
> mode point-to-point;
> }
> interface ae4;
> bpdu-block-on-edge;
> }
>
> With the interfaces gone I would expect the commit check to fail.
>
> --lyndon
>
--
Jason
