If you want something gui driven I’d do something like Meraki…you can do the same with just regular old Cisco routers using DMVPN as well. It’s a pretty common use case and well established.
On Thu, Feb 10, 2022 at 1:03 PM William Herrin <b...@herrin.us> wrote: > Hi folks, > > Do you have any recommendations for VPN appliances? Specifically: I need > to build a site to site VPNs at speeds between 100mpbs and 1 gbit where all > but one of the sites are behind an IPv4 NAT gateway with dynamic public IP > addresses. > > Normally I'd throw OpenVPN on a couple of Linux boxes and be happy but my > customer insists on a network appliance. Site to site VPNs using IPSec and > static IP addresses on the plaintext side are a dime a dozen but traversing > NAT and dynamic IP addresses (and automatically re-establishing when the > service goes out and comes back up with different addresses) is a hard > requirement. > > Thanks in advance, > Bill Herrin > > > -- > William Herrin > b...@herrin.us > <https://bill.herrin.us/> > https://bill.herrin.us/ >