It can handle a few full tables, but the performance of an MX80/MX104 is nearly the same as the EX4200 switch.
Ryan On Oct 16 2020, at 4:41 pm, Tony Wicks <[email protected]> wrote: > Well, there is always the MX104 (if you want redundancy) or MX80 if you > don’t. That will give you 80gig wire speed just don’t load it up with more > than one full table. > > > From: [email protected] <[email protected]> > Sent: Saturday, 17 October 2020 10:57 am > To: 'Tony Wicks' <[email protected]> > Cc: [email protected] > Subject: RE: cheap MPLS router recommendations > > > > > > For this particular gig even the MX204 would be overkill in terms of price as > well as performance. > Ideally something like 204 but with only those 8 10/1G ports (i.e. without > the 4x100G ports) > > adam > From: Tony Wicks <[email protected] (mailto:[email protected])> > Sent: Friday, October 16, 2020 10:36 PM > To: [email protected] (mailto:[email protected]) > Cc: [email protected] (mailto:[email protected]) > Subject: RE: cheap MPLS router recommendations > > > > > > Juniper MX204, easy
