You will want to check out these.
https://mccowntech.wptstaging.space/product-category/surge-protectors/rack-mount-surge-protectors/
They are made to fit into the 1U APC Chassis PRM24.
We rely on them heavily in the WISP Market. I've had equipment on a
tower that was physically destroyed by lightening, and the Router Port
on the other side of these arrestors was just fine.
On 8/13/2019 1:51 PM, Rob Pickering wrote:
On Tue, 13 Aug 2019 at 19:23, Javier J <jav...@advancedmachines.us
<mailto:jav...@advancedmachines.us>> wrote:
I'm working with a client site that has been hit twice, very close
by lightening.
I did lots of electrical work/upgrades/grounding but now I want to
focus on protecting Ethernet connections between core
switching/other devices that can't be migrated to fiber optic.
I was looking for surge protection devices for Ethernet but have
never shopped for anything like this before. Was wondering if
anyone has deployed a solution?
They don't have a large presence on site (I have been moving all
of their core stuff to AWS) but they still have core networking /
connectivity and PoE cameras / APs around the property.
Since migrating their onsite servers/infra to the cloud, now their
connectivity is even more important.
The correct answer is use fiber.
If you really, really can't then APC make a single port transient
arrestor p/n PNET1GB.
I've used these in the past for a PoE phone in a wooden gatehouse hut
right on the 100M max length with no power for active kit and they
seem to work fine. I'm using one at the moment for a PoE access point
in my garden shed. Not sure I would bring an inter building link in
copper onto an expensive core switch though.
Don't know of anything in higher density than "one port".
--
Rob Pickering, r...@pickering.org <mailto:r...@pickering.org>
