Forrest W. Christian wrote:
I'm switching one end of a PtP DS3 to a location which only has fiber to
the carrier. As a result, I'm really in need of a Fujitsu FlashWave
4010 or equivalent which can take a sonet-framed OC3 from a carrier and
break it out into individual DS3's.
So far, my normal sources of used equipment have come up dry - but most
of them really only deal with data networking (cisco) stuff, so it's a
bit out of their league. A long time ago (you know, like 100 internet
years ago), I used to post these type of needs to
misc.forsale.computers.net-hardware with good results, but that doesn't
look very useful anymore.
Take a look at Adtran's OPTI-3 or more scalable OPTI-6100 series products.
I have no idea why Adtran has mile-long URLs, so here goes:
http://tinyurl.com/3gt54w
http://tinyurl.com/2z3yeg
Some used gear out there but not a lot. The right wholesaler can give
you a pretty good discount on the new stuff. We've had excellent
results with Adtran equipment.
Note that this gear as well as TTBOMK the Fujitsu is native 48VDC power,
so figure in a power supply if you're in an AC environment. Adtran
sells compatible power supplies if needed.
--
Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED]
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
