mike choy wrote: > Michael T. Dean wrote: > >> On 01/21/2006 07:17 PM, mike choy wrote: >> >> >>> Hi Team >>> >>> When I press the "i" key to get information on current programme it >>> comes up with unknown >>> The data is there in the programme guide. It shows the channel number >>> and time, but no prog info >>> >>> It was working fine for the last week or so. >>> I have completely re-run mythtv-setup and rescanned the channels. >>> >>> >>> >> And your sources are properly associated with inputs in mythtv-setup? >> >> Mike >> _______________________________________________ >> mythtv-users mailing list >> [email protected] >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> >> >> > Hmm > > Have I missed something here? I stripped the mythtv-setup back to one > card only and the OSD info comes back in sync with the epg guide data. > > I then add the second card back in using mythtv-setup and the OSD info > disappears again. Here are my input and source associations: > > Two dvb cards a kworld dvb, and a freecom usb > > DVB[1] (DVBInput) --> Freeview-Freecom > DVB[0] (DVBInput) --> Freeview-Kworld > > Mike C > > > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > >
Looks like I got this wrong the input connections should look like this DVB[1] (DVBInput) --> Freeview DVB[0] (DVBInput) --> Freeview ie only one video source is needed, both cards point to the same video source, AND there is only a need to tune the channels against one card. This makes a lot more sense, especially when I add in the DVB -S card at a later date. Mike C _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
