I haven't been able to find a working modeline for 1080i display on my TV. My TV is a Mitsubishi WS-48311 (48" rear-projection, Mitsubishi 2003 model series). Is there anyone who has a working 1080i modeline for this TV?
I've tried defining my own modelines and I've tried a bunch of modelines I've found in messages to this list and on various web sites. For all of them, the initial nVidia logo is is wrapped around the screen (it begins near the right edge of the screen and wraps around to the left edge) and for most there are some additional artifacts in the logo display. Once myth starts I have a vertical white bar down the center of the screen, but the image is correctly centered (not wrapped). Display of the actual (NTSC) TV content is not wrapped around, but the vertical white bar persists and for some modelines only the first frame is displayed while the audio continues correctly. I have no problems when outputting video at 480p. My setup: Debian testing Mythtv packages from ftp.nerim.net/debian-marillat nVidia driver version 1.0.7174 X.org X server version 6.9.0 Video output using a VGA to (RCA) RGBHV breakout cable Mitsubishi WS-48311 48" rear-projection TV I assume the problem with only the first frame of video being shown is a bug in either the nVidia driver or the X server. What about the "vertical white bar" problem? Is this a problem with: the modeline, the video connection, some software, my TV? I'd greatly appreciate a verified working modeline for this particular TV so I can determine if the problems I'm encountering are due the modelines I've tried or not. Otherwise, any insight anyone can provide into the specific problems I'm encountering would be helpful. thanks, - jason _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
