On Thursday 12 January 2006 14:35, Graeme Hilton wrote: > All, > > This is more of a system configuration issue than a myth issue, but as > we all use a variety of display hardware I thought I'd be able to tap a > few brains. > > I have a video card with a TV-Out and a VGA (a Radeon 9600XT). It's > connected to an 8" LCD panel via the VGA and to my home theatre system > (Denon DHT500). This feeds a 28" widescreen CRT through a SCART socket. > > The 8" panel is 800x600 native resolution and that's what the system is > set to run at. I ran the fglrxconfig from ATI to set up the TV-Out and > attached you can see the resulting xorg.conf. X is cloning the output > from the VGA to the TV-Out. I have tried the Dual Head configuration, > but X refuses to start. (I can dig out some logs if anyone is interested.) > > My problem is that when I turn on the TV it is receiving a 4:3 format > signal, with black bars down the sides. I think this is because the > signal from the TV-Out is 4:3. How can I get that to become a 16:9 format? > > Ideally I'd like 4:3 on the VGA and 16:9 on the TV. Does anyone have a > similar setup?
you would need to change the resolution for the feed to the TV to a 16:9 feed. so 800:450 would work and be relatively close to what you have. -- Steve _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
