Sam Davies wrote: > Hi there > > I have a EPIA SP13000 which was running FC4 with the RPMs from > http://washington.kelkoo.net/epia/FC4/RPMS/ with mythTV using via > xvmc-vld mpeg2 decoding, and despite a few glitches, all was fine. > > I then needed to update X, and did so with yum update xorg-x11\* (with > the epia repositories set up as detailed). Although xine still seems > to work fine with the mpeg acceleration, mythtv plays video fine with > acceleration, however, when you try to exit watching a video, a half > blue, half black screen is shown for a couple of seconds. The system > then returns to a half-rendered myth screen, but the system seems to > have hung. > > I have tried getting the latest version of mythtv from svn and > recompiling, but the same problem occurs. > > I seem to remember reading about something similar about this on one > of the mailing lists a while ago, but I can't seem to find it. > > My X log doesn't seem register any errors at the point of crashing. > > Thanks in advance > > sam > > kernel: 2.6.12-1.1447 (with drm module) > X: 6.8.99.903-0 > myth: from svn revision 8525
In developing MiniMyth <http://linpvr.org>, I encountered the same thing on the CN400 based motherboards. It appears that the problem started after the big Xv update in the unichrome drivers. As a result, have not upgraded X beyond 6.8.2 and I have not upgraded the unichrome drivers beyond the 20050815 snapshot. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
