I have been looking into those as well. The default timing for memory is 3-3-3-8 Corsair reccomends 2.5-3-3-6 for AMD CPUs. These were worse then the defaults. So far I have the clock back up to 190MHz. Its still stable. The cpu runs at 2104MHZ instead ot 2194MHZ , I doubt I will notice and practical speed differences.
The AN7 has plenty of overclocking features On Sunday 13 November 2005 15:38, [EMAIL PROTECTED] wrote: > You might also want to try some other settings besides FSB. Many of the > newer motherboards tend to include "overclocker" settings for all sorts > of components (FSB, memory timings, memory speed, voltages, etc.) and > having any one of these wrong can make for a very unstable system. > Unfortunately, the "default" settings aren't necessarily right, either. > (I have a new motherboard whose default settings "undervolt" the AGP > bus. That was an annoying problem to track down. Yours is more likely > a memory timings/speed/voltage issue, but the point is that the defaults > may not be appropriate.) -- Alan Anderson [EMAIL PROTECTED] _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
