I'm trying to transcode a recording with nuvexport but it keep
stopping part way through a specific recording (I've done others
successfully). I used --debug and run the resulting command directly
with the same results, so i guess this is really a problem with
transode. At any rate, I've looked at the file and the cutpoints and
all looks well. I'm attaching the output in case someone else can
provide me with any clues as to what the problem/solution is. This is
running on MythTV .16.1, FC1, with content captured from a PVR-250 in
MPEG2 converting to XVID. Thanks in advance for any advice!
---
$ nice -n 19 transcode -V -i /video/recordings/
1049_20050723160000_20050723170000.nuv -x mpeg2 -j 10,10,10,10 -J
skip="13891-17731 22696-26356 31276-35851 52666-56356 71191-75796
88291-92326 107656-107790" -J smartyuv -J yuvdenoise=mode=2 -y
xvid4 -Z 472x354 -N 0x55 -b 128,0,2,0 -R 3 -w 6 -o "./Survivorman -
Behind the Scenes.2.avi" 2>&1
transcode v0.6.12 (C) 2001-2003 Thomas Oestreich, 2003-2004 T.
Bitterberg
[transcode] (probe) suggested AV correction -D 1 (33 ms) | AV 49 ms |
15 ms
[transcode] auto-probing source /video/recordings/
1049_20050723160000_20050723170000.nuv (ok)
[transcode] V: import format | MPEG-2 (V=mpeg2|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 480x480 1.00:1 encoded @ 4:3
[transcode] V: clip frame (<-) | 460x460
[transcode] V: zoom | 472x354 1.33:1 (Lanczos3)
[transcode] V: decoding fps,frc | 29.970,4
[transcode] V: single-pass | (mode=3) constant quantizer/quality
(quant=6)
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x50 MPEG layer-2 [48000,16,2]
192 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2]
128 kbps
[transcode] V: encoding fps,frc | 29.970,4
[transcode] A: bytes per frame | 6408 (6406.400000)
[transcode] A: adjustment | [EMAIL PROTECTED]
[transcode] V: IA32 accel mode | sse2 (sse2 sse mmxext mmx asm)
[transcode] V: video buffer | 10 @ 480x480
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/
PCM | (subtitle)
[import_mpeg2.so] v0.4.0 (2003-10-02) (video) MPEG2
[filter_skip.so] v0.0.1 (2001-11-27) skip all listed frames
[filter_skip.so] skipping frames 13891-17731 22696-26356 31276-35851
52666-56356 71191-75796 88291-92326 107656-107790
[filter_smartyuv.so] (MMX) 0.1.4 (2003-10-13) Motion-adaptive
deinterlacing
[filter_yuvdenoise.so] Using extended MMX SIMD optimisations.
[filter_yuvdenoise.so] v0.2.1 (2003-11-26) mjpegs YUV denoiser
[export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka
API 4.0) | (audio) MPEG/AC3/PCM
[import_vob.so] tccat -i "/video/recordings/
1049_20050723160000_20050723170000.nuv" -t vob -d 0 -S 0 | tcdemux -a
0 -x mp3 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mp2 -d 0 |
tcdecode -x mp2 -d 0
[import_mpeg2.so] tcextract -x mpeg2 -i "/video/recordings/
1049_20050723160000_20050723170000.nuv" -d 0 | tcdecode -x mpeg2 -d 0
-y yv12
[export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
[export_xvid4.so] found. Default settings will be used instead.
Audio: using new version
Audio: using lame-3.96 MMX
[encoder.c] Delaying audio (0)], 4.17 fps, EMT: 0:00:00, ( 5| 1| 3)
[encoder.c] Delaying audio (0)], 5.08 fps, EMT: 0:00:01, ( 0| 1| 8)
[demuxer.c] (pid=9838) '0xba010000' not yet supported1:05, ( 0| 0| 8)
(extract_mpeg2.c) missing start code at 0xf140000 0:11:13, ( 0| 0| 8)
clean up | frame threads | unload modules | cancel signal | internal
threads | done
[transcode] encoded 16344 frames (0 dropped, 0 cloned), clip length
545.34 s
---
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
