x.org config please Brian M. Sperlongano wrote:
> Hi all, > > I'm having trouble getting my Xorg configured properly...it's probably > something simple, but it seems to have something to do with XV. I > must confess I know little about Xorg configuration. I can't get > mplayer, tvtime, xawtv, etc to run because they complain about not > having overlay support. > > I'm using a PVR-500, 0.3.9 ivtv drivers. I have at one point in the > past gotten video out of the /dev/videoX devices, and I'm pretty sure > they work...I believe X is configured incorrectly. I've included > error output from each of the three programs below. > > For tvtime, my output is: > > localhost ~ # DISPLAY=:0.0 tvtime > Running tvtime 0.9.15. > Reading configuration from /etc/tvtime/tvtime.xml > Reading configuration from /root/.tvtime/tvtime.xml > xcommon: No window properties found for EWMH. > xvoutput: No XVIDEO port found which supports YUY2 images. > > *** tvtime requires hardware YUY2 overlay support from your video card > *** driver. If you are using an older NVIDIA card (TNT2), then > *** this capability is only available with their binary drivers. > *** For some ATI cards, this feature may be found in the experimental > *** GATOS drivers: http://gatos.souceforge.net/ > *** If unsure, please check with your distribution to see if your > *** X driver supports hardware overlay surfaces. > > For xawtv, my output is: > > localhost ~ # DISPLAY=:0.0 xawtv > This is xawtv-3.94, running on Linux/i686 (2.6.12-gentoo-r10) > switching visual (0x26) > /dev/video0 [v4l2]: no overlay support > v4l-conf had some trouble, trying to continue anyway > Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*- > *-*-c-*-*-*" to type FontStruct > no way to get: 0x0 8 bit StaticGray > > > And, here's a sample from mplayer: > > localhost ~ # mplayer /dev/video1 > MPlayer 1.0pre7try2-3.3.6 (C) 2000-2005 MPlayer Team > CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino (Family: > 6, Stepping: 2) > Detected cache-line size is 64 bytes > MMX supported but disabled > MMX2 supported but disabled > SSE supported but disabled > 3DNow supported but disabled > 3DNowExt supported but disabled > CPUflags: MMX: 0 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0 > Compiled for x86 CPU with extensions: > > > > 85 audio & 196 video codecs > Setting up LIRC support... > mplayer: could not connect to socket > mplayer: No such file or directory > Failed to open LIRC support. > You will not be able to use your remote control. > Playing /dev/video1. > Cache fill: 18.75% (1572864 bytes) MPEG-PS file format detected. > VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 9600.0 kbps (1200.0 > kbyte/s) > ========================================================================== > Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 > AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000) > Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) > ========================================================================== > vo: couldn't open the X11 display ()! > vo: couldn't open the X11 display ()! > VO XOverlay need a subdriver > [gl] Using 4 as slice height (0 means image height). > vo: couldn't open the X11 display ()! > vo: couldn't open the X11 display ()! > SDL: Initializing of SDL failed: No available video device. > ========================================================================== > Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough > VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES) > VDec: using Mpeg PES as output csp (no 0) > Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. > VO: [vesa] 720x480 => 720x540 Mpeg PES > > Thanks, > Brian > >------------------------------------------------------------------------ > >_______________________________________________ >mythtv-users mailing list >[email protected] >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
