At 08:40 AM 8/29/2005, you wrote:
Hello, this is my first post so please bear with me.
I have a P3 933 mhz, the PVR-350 with grey remote, and an old Nvidia TNT2
in the AGP slot.
MythTV comes up and I escape out to the command line.
I type
lircd start
and then I try to run
irw
when I hit buttons on the remote nothing happens.
The IR receiver is plugged in through what looks like a headphone
connector on the back of the PVR-350, I plugged it in there since it fit
and came with the card.
There are no LED's on the remote. I am not sure if the remote is at fault,
the receiver or my configuration.
MY pvr-350 only has the remote plugged in right now as I have not figured
out how I am going to connect this thing to the TV yet.
Is there a cable that connects the sound card to the PVR-350? the only
cables I found were a IR receiver, FM radio antenna, the big cable mess,
and a little adapter piece. I have an onboard i8x0 sound with three plugs.
thank you for your time and have a good day
http://knoppmythwiki.org/index.php?page=HauppaugeThreeFiftyInstallation
Check out the section on lircrc in
http://knoppmythwiki.org/index.php?page=LIRCHowTo to set up your remote
You need to determine if you have the silver or grey remote to set up the
buttons properly.
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
