Interestingly enough, I'm using 0.2.0 (rc3j). Maybe I have one of the early PVR-500 cards, I'm not sure. But, it works fine. Here's the dmesg output:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3j) loading ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model 0x009d4496, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: i2c attach [client=saa7115[0],ok] msp34xx: ivtv version ivtv: i2c attach [client=MSP3445G-B8,ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 8 tuner: type set to 8 (Temic NTSC (4036 FY5)) by ivtv i2c driver #0 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 2011, itv = 0xe09c60a0 ivtv: Initialized WinTV PVR 250, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 ivtv: i2c attach [client=tveeprom[1],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: i2c attach [client=cx25840[0],ok] ivtv: i2c attach [client=wm8775[0],ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 2155, itv = 0xe09da540 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0755 vendor: 0x1039 ivtv: i2c attach [client=tveeprom[2],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) ivtv: i2c attach [client=cx25840[1],ok] ivtv: i2c attach [client=wm8775[1],ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 66 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== ivtv: ivtv_enc_thread: pid = 2360, itv = 0xe09ee9e0 ivtv: i2c attach [client=Hauppauge IR,ok] Note though, that I haven't tested out the radio yet. It's not something that I use (right now). The PVR-500 is detected as two PVR-150 cards, which it apparently should be. -- Joe --- Andrew Close <[EMAIL PROTECTED]> wrote: > On 7/22/05, Joe Votour <[EMAIL PROTECTED]> wrote: > > I am using a setup with a PVR-500 and a PVR-250, > and > > it is working absolutely fine, with no problems at > > all. > > > > I am using ATrpms, stable, and followed the guide > by > > Jarod Wilson. All three tuners are recording just > > fine. > > > > Here's the relevant portions of my modprobe.conf: > > ########## > > alias char-major-61 lirc_i2c > > # ivtv modules setup > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > alias char-major-81-1 ivtv > > alias char-major-81-2 ivtv > > options cx25840 no_black_magic=1 > > alias tveeprom tveeprom-ivtv > > alias msp3400 msp3400-ivtv > > alias tuner tuner-ivtv > > install lirc_i2c /sbin/modprobe ivtv; > /sbin/modprobe > > --ignore-install lirc_i2c > > ########## > <snip/> > > Joe, > > what ivtv driver are you using just out of > curiosity? i looked at > Jareds directions when i installed my 500 (even > though i'm running > KnoppMyth) and added some of his modprobe settings > to my config. > everything works fine, but i noticed on boot the > other day that the > options cx25840 no_black_magic=1 errored out with > some msg saying that > the options tag was no longer valid and would be > ignored. so i've > removed that line with no noticable affects to my > system. so i'm just > curious if my driver version is newer (3.6.y i > think) than yours and > that line is no longer valid; or what? > i actually ended up removing quite a few of those > lines one at a time > and seeing what happened. i'll try to post my > config back to this > thread tonight with a confirmed ivtv driver version. > > thanks > andy > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
