I copied that file to the appropriate directory then i deleted the tuner settings in mythtv then i probed for ivtv cards and ran myttv setup again using the / setting and i still cannot watch tv. Here is the new log: Jun 29 19:38:20 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jun 29 19:38:20 localhost kernel: ivtv: version 0.3.5 (l) loading Jun 29 19:38:20 localhost kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4 Jun 29 19:38:20 localhost kernel: ivtv: In case of problems please include the debug info Jun 29 19:38:20 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jun 29 19:38:20 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jun 29 19:38:20 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jun 29 19:38:20 localhost kernel: ivtv: Found an iTVC16 based chip Jun 29 19:38:20 localhost kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10 Jun 29 19:38:20 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Jun 29 19:38:20 localhost kernel: ivtv: XXX PCI device: 0x0730 vendor: 0x1039 Jun 29 19:38:22 localhost kernel: tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7970919 Jun 29 19:38:23 localhost kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) Jun 29 19:38:24 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jun 29 19:38:25 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jun 29 19:38:25 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jun 29 19:38:25 localhost kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision 0x00000001 Jun 29 19:38:25 localhost kernel: ivtv: Radio detected Jun 29 19:38:25 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Jun 29 19:38:26 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jun 29 19:38:26 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jun 29 19:38:26 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. Jun 29 19:38:26 localhost kernel: cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa Jun 29 19:38:26 localhost kernel: cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 Jun 29 19:38:26 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jun 29 19:38:26 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jun 29 19:38:26 localhost kernel: ivtv: Encoder revision: 0x02040024 Jun 29 19:38:27 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jun 29 19:38:27 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jun 29 19:38:27 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 Jun 29 19:38:27 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total Jun 29 19:38:27 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 Jun 29 19:38:27 localhost kernel: ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total Jun 29 19:38:27 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 Jun 29 19:38:27 localhost kernel: ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total Jun 29 19:38:27 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 Jun 29 19:38:27 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total Jun 29 19:38:27 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Jun 29 19:38:27 localhost kernel: ivtv: Create stream 4 Jun 29 19:38:27 localhost kernel: ivtv: Setting Tuner 47 Jun 29 19:38:27 localhost kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 Jun 29 19:38:27 localhost kernel: ivtv: Switching standard to NTSC. Jun 29 19:38:27 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jun 29 19:38:27 localhost kernel: ivtv: ==================== END INIT IVTV ==================== I ran mythtv frontend from command line and heres what it said when i attempted to watch tv: 2005-06-29 19:47:49.608 New DB connection, total: 2 2005-06-29 19:47:50.510 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-06-29 19:47:51.984 Using protocol version 15 2005-06-29 19:47:52.998 Using protocol version 15 2005-06-29 19:47:57.933 Disable DPMS 2005-06-29 19:49:07.457 ReadStringList timeout (quick). Remote encoder not responding. ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) 2005-06-29 19:49:20.187 WriteStringList: Bad socket 2005-06-29 19:49:20.188 ReadStringList: Bad socket Remote encoder not responding. ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) 2005-06-29 19:49:22.306 Opening audio device '/dev/dsp'. 2005-06-29 19:49:22.307 Opening OSS audio device '/dev/dsp'. 2005-06-29 19:49:27.129 Using XV port 61 2005-06-29 19:49:34.306 WriteStringList: Bad socket 2005-06-29 19:49:34.306 ReadStringList: Bad socket Remote encoder not responding. 2005-06-29 19:49:34.307 LiveTV not successfully started 2005-06-29 19:49:35.022 Using realtime priority. 2005-06-29 19:49:35.909 Video timing method: RTC 2005-06-29 19:49:36.486 Changing from None to WatchingLiveTV 2005-06-29 19:49:36.495 Changing from None to None 2005-06-29 19:49:38.734 Enable DPMS Illegal instruction
And the backend: 2005-06-29 19:47:53.534 Changing from None to WatchingLiveTV 2005-06-29 19:48:39.922 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:42.673 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:47.563 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.609 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.627 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.656 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.674 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.692 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:54.710 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:48:57.775 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:49:00.021 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:49:03.075 IOBOUND - blocking in ThreadedFileWriter::Write() 2005-06-29 19:49:09.718 IOBOUND - blocking in ThreadedFileWriter::Write() Unable to write to client socket, as it's no longer there 2005-06-29 19:49:37.420 Changing from WatchingLiveTV to None What should i do now and has anyone else been able to successfully use this capture card with fedora 3/mythtv? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
