--- [EMAIL PROTECTED] wrote: > > I have built a backend with a PVR-250 using Jarod's > great guide. It's build > on FC3 with a 2.6.10-1.770fc3 kernel from ATrpms. > I'd like to add an HD-3000 > card to it, so I searched the archives for > installation advice. It looks > like I should upgrade my kernel to 2.6.11 and use > dvb drivers. > > I would appreciate some advice about upgrading the > kernel. It doesn't look > like ATrpms has a 2.6.11 kernel for FC3 yet. Should > I get the kernel sources > from kernel.org and build it myself? Do I need to > apply any patches specific > to FC3? Are the kernel rpms for FC3 on ATrpms (like > the xxx-1.770fc3 one I'm > running now) built straight from the kernel.org > sources, or are they tweaked > or patched for FC3? > > Also, following the Guide, after installing FC3 and > upgrading to the 770 > kernel, I got various kernel-specific kerner models > (ivtv, lirc, etc.). The > appropriate kernel modules for the 770 kernel are > all available on ATrpms. > If I upgrade to 2.6.11, I'll need to get or make > 2.6.11 kernel modules. Do I > need to build them from source? > > Besides the kernel and the kernel modules, are there > any other patches I > need to get?
I have a similar setup and instead of upgrading the kernel I just grabbed the 2.0 drivers from pcHDTV, they work fine with 2.6.10-1.770_FC3. If you go the kernel upgrade route I think you will either need 2.6.11 and cvs from v4l or 2.6.12rc2, which I think has support for the pcHDTV under dvb. Howard
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
