Howdy all, I've spent some time recently trying to bring up a pair of Air2PC cards without much luck. Turning on some verbose debugging yields this:
Starting up as the master server. 2005-04-18 22:31:22.751 New DB connection, total: 2 2005-04-18 22:31:22.755 SIParser: About to do a reset 2005-04-18 22:31:22.755 SIParser: Closing all PIDs 2005-04-18 22:31:22.756 SIParser: Using DelAllPids from SIParser which does nothing 2005-04-18 22:31:22.756 SIParser: Resetting all Table Handlers 2005-04-18 22:31:22.756 SIParser: SIParser Reset due to channel change 2005-04-18 22:31:22.756 DVB#0 DVB SI Table Parser Started 2005-04-18 22:31:22.757 SIParser: Starting DVB Section Reader thread 2005-04-18 22:31:22.757 DVB#0 Using DVB card 0, with frontend Nextwave nxt2002 VSB/QAM frontend. 2005-04-18 22:31:22.757 DVB#0 Trying to tune to channel 11_1. 2005-04-18 22:31:22.758 SIParser: Starting SIScanner 2005-04-18 22:31:22.759 New DB connection, total: 3 2005-04-18 22:31:22.760 DVB#0 ERROR - Could not find dvb tuning parameters for transport 0 2005-04-18 22:31:22.760 DVB#0 ERROR - Failed to get channel options for channel 11_1. 2005-04-18 22:31:22.765 SIParser: About to do a reset Notice the "Could not find dvb tuning paramters for transport 0". It seems to indicate (through looking at the code) that I have an empty dtv_multiplex table. In fact, poking around with mysql tells me the table has zero rows. Prior to 0.18, it seems that the recommended action involved scanning for the channels in mythtv-setup. Unfortunately, CVS (as of midnight Central time, U.S.) doesn't seem to have this feature. Where did I go wrong? I had a mostly-working HD-2000 v4l setup before I switched over to the Air2PC cards. I've dropped the card and channel configurations twice, but dtv_multiplex never seems to get filled in. Slightly exhausted, -- Trey
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
