On Tue, 18 Jan 2005 13:56:19 +0000, Graeme Hilton <[EMAIL PROTECTED]> wrote: > > > ========= FC3 + CVS dvb-kernel + Nova-T Install > > MINI-HOWTO================ > > ========= By: Paul Pettigrew, Sydney-Australia. 1 Jan 2005 > > ================ > > <snip> > > > To unload the drivers that may already be loaded (but are not our fresh > > CVS ones), and to load up our CVS ones, enter the following commands > > respectively: > > # ./insmod.sh unload > > > > # ./insmod.sh load > > There will be some errors, as drivers for cards we do not have will > > attempt > > to load. If you get this behaviour, this is fine for now, as we will > > determine shortly if our drivers have loaded correctly. For me, I get the > > following output to the 'load' command: > > Inserting DVB modules into kernel > > FATAL: Module crc32 not found. > > FATAL: Module firmware_class not found. > > FATAL: Module evdev not found. > > > > The devices will now be created. Confirm by entering: > > # ls /dev/d* > > > > You will now see: > > /dev/dnrtmsg /dev/dvb0.demux0 /dev/dvb0.frontend0 > > /dev/dsp /dev/dvb0.dvr0 /dev/dvb0.net0 > > Everything seems to work until I reach this point where the /dev/dvb > entries just don't exist. I've upgraded udev to the latest version in > the development directory on atrpms.net > > The /sbin/lspci -v brings up the following: > 00:0b.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05) > Subsystem: Hauppauge computer works Inc.: Unknown device 9002 > Flags: bus master, medium devsel, latency 32, IRQ 169 > Memory at ea000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > 00:0b.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05) > Subsystem: Hauppauge computer works Inc.: Unknown device 9002 > Flags: bus master, medium devsel, latency 32, IRQ 169 > Memory at eb000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [4c] Power Management version 2 > > 00:0b.4 Multimedia controller: Conexant: Unknown device 8804 (rev 05) > Subsystem: Hauppauge computer works Inc.: Unknown device 9002 > Flags: bus master, medium devsel, latency 32, IRQ 169 > Memory at ec000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [4c] Power Management version 2 > > Which is slightly different to that in the Howto, in that the howto has > a Phillips chip mentioned, where mine has Conexant. > > I'm new to Fedora and Linux in genereal so would apprectiate any advice > on what I've done wrong, or any steps I can take to fix this. > > PS. My system is Athlon 64 bit, so where I can I've used the x86_64 rpms > instead of the i386's. > > -- > Graeme Hilton > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > Try this guide instead, the philips chipset is the old style Nova-T's, the Conexant chip is the new style.
Thanks to Richard for the guide. http://www.helkit.com/cgi-bin/twiki/bin/view/Main/MythTVDVB-TAndConexantNotes -- Regards, ~CM
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
