I am running mpd-3.18 in freebsd 6.1 (I've installed it using ports). I have
successfully tested it using Windows Xp. However I couldn't connect it using
windows 2000. Here is my configuration:
my mpd.conf
set bundle enable radius-auth
set bundle enable radius-acct
set iface idle 0
set iface disable on-demand
set iface disable proxy-arp
set iface enable tcpmssfix
set iface route default
set iface up-script /abc/abc
set iface down-script /abc/abc
set link disable chap
set link enable pap
set link keep-alive 60 180
set link bandwidth 200000
set ipcp yes vjcomp
set ipcp ranges xxxxxxxx xxxxxxxxx
set ipcp dns xxxxxxxx xxxxxxxxxx
set ccp yes mppc
set link max-redial -1
set link mtu 1480
set link mru 1480
#set bundle enable conmpression
#set ccp yes mppc
#set ccp yes mpp-e40
#set ccp yes mpp-e128
#set ccp yes mpp-stateless
set pppoe iface xl0
load radius
My mpd.log
Sep 6 13:06:06 pppoe-05 mpd: Incoming PPPoE connection request via xl0: for
service "*" from 00:e0:4c:77:60:22
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] Accepting PPPoE connection
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] PPPoE response sent
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: Open event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: state change Initial -->
Starting
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: LayerStart
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] bundle: OPEN event in state CLOSED
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] opening link "wlink-2"...
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] link: OPEN event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: Open event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Initial --> Starting
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: LayerStart
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: OPEN event in state DOWN
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] PppoeOpen() on incoming call
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state OPENING
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] PPPoE connection successful
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: UP event in state OPENING
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state UP
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] link: UP event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] link: origination is remote
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: Up event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Starting -->
Req-Sent
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: phase shift DEAD --> ESTABLISH
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #5
Sep 6 13:06:06 pppoe-05 mpd: PROTOCOMP
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: MP SHORTSEQ
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Request #0 link 0
(Req-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 51947c58
Sep 6 13:06:06 pppoe-05 mpd: CALLBACK
Sep 6 13:06:06 pppoe-05 mpd: Not supported
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1614
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [LOCAL] f1 4f 96 b7 b0 49 48 b1 bd
c5 8f 08 6a eb d2 62 00 00 00 00
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigRej #0
Sep 6 13:06:06 pppoe-05 mpd: CALLBACK
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Reject #5 link 0
(Req-Sent)
Sep 6 13:06:06 pppoe-05 mpd: PROTOCOMP
Sep 6 13:06:06 pppoe-05 mpd: MP SHORTSEQ
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #6
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Request #1 link 0
(Req-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 51947c58
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1614
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [LOCAL] f1 4f 96 b7 b0 49 48 b1 bd
c5 8f 08 6a eb d2 62 00 00 00 00
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigNak #1
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #6 link 0
(Req-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #7
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Request #2 link 0
(Req-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 51947c58
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [LOCAL] f1 4f 96 b7 b0 49 48 b1 bd
c5 8f 08 6a eb d2 62 00 00 00 00
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigAck #2
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 51947c58
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [LOCAL] f1 4f 96 b7 b0 49 48 b1 bd
c5 8f 08 6a eb d2 62 00 00 00 00
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Req-Sent -->
Ack-Sent
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #7 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #8
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #8 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #9
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #9 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #10
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #10 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #11
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #11 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #12
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #12 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #13
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #13 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: SendConfigReq #14
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: MAGICNUM 28e6ade4
Sep 6 13:06:06 pppoe-05 mpd: AUTHPROTO PAP
Sep 6 13:06:06 pppoe-05 mpd: MP MRRU 1600
Sep 6 13:06:06 pppoe-05 mpd: ENDPOINTDISC [802.1] 00 13 72 1b 64 7b
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: rec'd Configure Nak #14 link 0
(Ack-Sent)
Sep 6 13:06:06 pppoe-05 mpd: MRU 1492
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: not converging
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: parameter negotiation failed
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Ack-Sent --> Stopped
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: LayerFinish
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: CLOSE event in state UP
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state CLOSING
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: DOWN event in state CLOSING
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state DOWN
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] link: DOWN event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: Down event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Stopped --> Starting
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: phase shift ESTABLISH --> DEAD
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: LayerStart
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: Close event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: state change Starting --> Initial
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: LayerFinish
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] closing link "wlink-2"...
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: Close event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: state change Starting -->
Initial
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] IPCP: LayerFinish
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] bundle: CLOSE event in state OPENED
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] link: CLOSE event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] LCP: Close event
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: OPEN event in state DOWN
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] pausing 4 seconds before open
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state DOWN
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device: CLOSE event in state DOWN
Sep 6 13:06:06 pppoe-05 mpd: [wlink-2] device is now in state DOWN
The problem seems lie in LCP phase of the negotiation that is not-converging.
Does anybody faced the same problem ?
I've tried googling around but i haven't come around with any solution.
--
With regards,
Rustan
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Mpd-users mailing list
Mpd-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mpd-users
