On 1/31/06, gahn <[EMAIL PROTECTED]> wrote: > Hi: > > I got mpd working and logined into pptp server through > internet. From my pc, I can ping internal interface of > the pptp server, 192.168.128.1 (my pc address is > 192.168.128.10). the problem is that I can't ping > anything beyond that, such as 192.168.128.2 (it > actually is an interface of a router, on the same > subnet). > > From cmd of windows, with command "ipconfig": > > Ethernet adapter Local Area Connection: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : > 254.254.254.100 > Subnet Mask . . . . . . . . . . . : > 255.255.255.0 > Default Gateway . . . . . . . . . : > 254.254.254.1 > > PPP adapter test: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : > 192.168.128.10 > Subnet Mask . . . . . . . . . . . : > 255.255.255.255 > Default Gateway . . . . . . . . . : > > So how could I change the length of the masking of the > ppp adapter? > > once I can change the length of the masking bits, then > I can route my traffic into the rfc1918 networks that > behind of the vpn server. > > the manual page of: > > http://www.bretterklieber.com/mpd/doc3/mpd22.html > > don't seem to be matter though. > > here is the mpd.conf: > > default: > load pptp0 > > pptp0: > new -i ng0 pptp0 pptp0 > set ipcp ranges 192.168.128.1/21 > 192.168.128.10/21 > load common > > common: > set iface disable on-demand > set iface enable proxy-arp > set iface idle 1800 > set iface enable tcpmssfix > set bundle disable multilink > set bundle enable compression > set bundle yes crypt-reqd > set link no pap chap > set link enable chap-msv2 > set link keep-alive 10 60 > set link enable acfcomp protocomp > set ipcp yes vjcomp > set ipcp dns 192.168.64.96 > set ccp yes mppc > set ccp yes mpp-e128 > > BTW, mpd4 seems to be not very stable; I switched back > to 3.18 and it works fine. > > TIA > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 > _______________________________________________ > Mpd-users mailing list > Mpd-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mpd-users >
It would be strange if a ppp connection had a different subnet mask. You really should get into some reading on basic TCP/IP. What you need is to setup a route, something like this: route add 192.168.128/21 192.168.128.1 ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 _______________________________________________ Mpd-users mailing list Mpd-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mpd-users
