Hey > I am working with ModemManager with qmi-proxy and I have a weird behavior > when I am using ModemManager with the log-level set to DEBUG like this > "ModemManager --log-level=DEBUG &" > everything is working fine but when I use it normally or set the log-level to > anything else except debug I have "modem is unusable" > Here are the logs : > <debug> [modem2] cleaning up port 'net/mhi_hwip0'... > <debug> [modem2] cleaning up port 'unknown/wwan0qcdm0'... > <debug> [modem2] cleaning up port 'tty/ttyUSB2'... > <debug> [modem2] cleaning up port 'wwan/wwan0qmi0'... > <debug> [modem2] cleaning up port 'unknown/wwan0mbim0'... > <debug> [ttyUSB2/at] forced to close port > <debug> [modem2] (quectel) check SIM swap completed > <debug> [modem2] completely disposed > <debug> [device SG520TM] Reprobing modem... > <info> [device SG520TM] creating modem with plugin 'quectel' and '5' ports > <debug> [plugin/quectel] (quectel) QMI-powered Quectel modem found... > <debug> [wwan0qmi0/qmi] timeout monitoring enabled in QMI port > <debug> [modem3] port 'wwan/wwan0qmi0' grabbed > <debug> [plugin/quectel] port wwan0qcdm0 is blacklisted > <debug> [modem3] port 'wwan/wwan0qcdm0' grabbed > <debug> [plugin/quectel] port wwan0mbim0 is blacklisted > <debug> [modem3] port 'wwan/wwan0mbim0' grabbed > <debug> [modem3] port 'net/mhi_hwip0' grabbed > <debug> [ttyUSB2/at] timeout monitoring enabled in AT port > <debug> [ttyUSB2/at] AT port flagged as primary > <debug> [modem3] port 'tty/ttyUSB2' grabbed > <debug> [modem3] tty/ttyUSB2 at (primary) > <debug> [modem3] tty/ttyUSB2 at (data primary) > <debug> [modem3] net/mhi_hwip0 net (data) > <debug> [modem3] wwan/wwan0qmi0 qmi > <debug> [modem3] at data ports available but ignored > <debug> [wwan0qmi0/qmi] endpoint info updated: type 'pcie', interface number > '0' > <debug> [modem3] running QMI port 'wwan0qmi0' reset with data interface > 'mhi_hwip0' > <debug> [device SG520TM] modem recreated > <debug> [wwan0qmi0/qmi] bringing down data interface 'mhi_hwip0' > <debug> [modem3/mhi_hwip0/net] interface index: 2 > <debug> [wwan0qmi0/qmi] deleting all links in data interface 'mhi_hwip0' > <debug> [wwan0qmi0/qmi] Opening QMI device... > <debug> [wwan0qmi0/qmi] Checking if QMI device already opening... > <debug> [wwan0qmi0/qmi] Checking if QMI device already open... > <debug> [wwan0qmi0/qmi] Creating QMI device... > <debug> [wwan0qmi0/qmi] Opening device with flags: version-info, proxy... > <debug> [/dev/wwan0qmi0] opening device with flags 'version-info, proxy'... > <debug> [/dev/wwan0qmi0] created endpoint > <debug> [/dev/wwan0qmi0] sent message... > <<<<<< RAW: > <<<<<< length = 29 > <<<<<< data = 01:1C:00:00:00:00:00:01:00:FF:11:00... > > <debug> [/dev/wwan0qmi0] sent generic request (translated)... > <<<<<< QMUX: > <<<<<< length = 28 > <<<<<< flags = 0x00 > <<<<<< service = "ctl" > <<<<<< client = 0 > <<<<<< QMI: > <<<<<< flags = "none" > <<<<<< transaction = 1 > <<<<<< tlv_length = 17 > <<<<<< message = "Internal Proxy Open" (0xFF00) > <<<<<< TLV: > <<<<<< type = "Device Path" (0x01) > <<<<<< length = 14 > <<<<<< value = 2F:64:65:76:2F:77:77:61:6E:30:71:6D:69:30 > <<<<<< translated = /dev/wwan0qmi0 > > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 1 > <debug> [/dev/wwan0qmi0] transaction 0xf aborted, but message is not abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 2 > <debug> [/dev/wwan0qmi0] transaction 0x10 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 3 > <debug> [/dev/wwan0qmi0] transaction 0x11 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 4 > <debug> [/dev/wwan0qmi0] transaction 0x12 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 5 > <debug> [/dev/wwan0qmi0] transaction 0x13 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 6 > <debug> [/dev/wwan0qmi0] transaction 0x14 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 7 > <debug> [/dev/wwan0qmi0] transaction 0x15 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 8 > <debug> [/dev/wwan0qmi0] transaction 0x16 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 9 > <debug> [/dev/wwan0qmi0] transaction 0x17 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 10 > <debug> [/dev/wwan0qmi0] transaction 0x18 aborted, but message is not > abortable > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 1 > <debug> [/dev/wwan0qmi0] transaction 0x1 aborted, but message is not abortable > <debug> [wwan0qmi0/qmi] QMI port open operation failed: Transaction timed out > <debug> [modem3] couldn't open QMI port with data format update: Transaction > timed out > <debug> [wwan0qmi0/qmi] Opening QMI device... > <debug> [wwan0qmi0/qmi] Checking if QMI device already opening... > <debug> [wwan0qmi0/qmi] Checking if QMI device already open... > <debug> [wwan0qmi0/qmi] Creating QMI device... > <debug> [wwan0qmi0/qmi] Opening device with flags: version-info, proxy... > <debug> [/dev/wwan0qmi0] opening device with flags 'version-info, proxy'... > <debug> [/dev/wwan0qmi0] created endpoint > <debug> [/dev/wwan0qmi0] sent message... > <<<<<< RAW: > <<<<<< length = 29 > <<<<<< data = 01:1C:00:00:00:00:00:01:00:FF:11:00... > > <debug> [/dev/wwan0qmi0] sent generic request (translated)... > <<<<<< QMUX: > <<<<<< length = 28 > <<<<<< flags = 0x00 > <<<<<< service = "ctl" > <<<<<< client = 0 > <<<<<< QMI: > <<<<<< flags = "none" > <<<<<< transaction = 1 > <<<<<< tlv_length = 17 > <<<<<< message = "Internal Proxy Open" (0xFF00) > <<<<<< TLV: > <<<<<< type = "Device Path" (0x01) > <<<<<< length = 14 > <<<<<< value = 2F:64:65:76:2F:77:77:61:6E:30:71:6D:69:30 > <<<<<< translated = /dev/wwan0qmi0 > > <debug> [/dev/wwan0qmi0] number of consecutive timeouts: 1 > <debug> [/dev/wwan0qmi0] transaction 0x1 aborted, but message is not abortable > <debug> [wwan0qmi0/qmi] QMI port open operation failed: Transaction timed out > <warn> [modem3] couldn't start initialization: Transaction timed out > <error> [modem3] fatal error initializing: Fatal error: modem is unusable >
This is weird, as if the ModemManager process cannot talk to the proxy. Are you running MM as root? -- Aleksander
