On 22/12/19 17:29, Bruno Vetter wrote:
> root@9d52738:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4# find .
> -name interface|sort|xargs cat
> CDC Ethernet Control Model (ECM)
> CDC Ethernet Data
> Huawei Mobile Connect - Modem
> Huawei Mobile Connect - Application
> Huawei Mobile Connect - Pcui
> Huawei Mobile Connect - Ctrl
> Huawei Mobile Connect - Serial B
This is something we could use ourselves as well to automatically detect port
types, I'll add a task to handle this.
>
>> Does the Huawei command reference
>> specify which port is which?
>
> No. I think you cannot rely on a fixed mapping between ttyUSBx and a specific
> modem port. On a different software stack (not balenaOS) we had followed a
> suggestion to create symlinks via udev. Something similar to this:
> KERNELS=="1-1.3*", SUBSYSTEMS=="usb", DRIVERS=="option",
> ATTRS{bInterfaceNumber}=="02", SYMLINK+="modemPPP"
> KERNELS=="1-1.3*", SUBSYSTEMS=="usb", DRIVERS=="option",
> ATTRS{bInterfaceNumber}=="04", SYMLINK+="modemAT"
> ...
This info is fine. We also never bind the interface name to the type, we also
bind the interface number as in your example above, but not with symlinks.
Could you edit the huawei port type rules file and add these three lines
somewhere in the middle of the other rules?
$ vim /lib/udev/rules.d/77-mm-huawei-net-port-types.rules
SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*",
ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", ENV{.MM_USBIFNUM}=="02",
ENV{ID_MM_PORT_TYPE_PPP}="1"
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", ENV{.MM_USBIFNUM}=="04",
ENV{ID_MM_PORT_TYPE_AT_PRIMARY}="1"
Then:
$ sudo udevadm control --reload
$ sudo udevadm trigger
$ sudo sytemctl restart ModemManager
Then retry connection/disconnection attempts, and attach debug logs.
Anyway, according to the lsusb output, your modem has 3 different USB
configurations, and configuration #3 is a full MBIM configuration. This is what
you should definitely try to use, and forget about PPP or other huawei-specific
setup all together (although please try the test above as well...). If I'm not
mistaken, usb_modeswitch has some logic to "prefer MBIM configurations" always
and do the USB configuration switching automatically. You could try to test
that running this:
$ sudo usb_modeswitch -v 12d1 -p 15c1 --configuration 3
After that, the module should re-enumerate using MBIM. I assume your setup has
libmbim and ModemManager installed with MBIM support as well, right?
--
Aleksander
https://aleksander.es
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
