Greetings,
I'm working with a u-blox SARA R410M CAT M1 modem
(https://www.u-blox.com/en/product/sara-r4n4-series) using Linux 4.15
and modem-manager-1.9.0 / libqmi-utils-1.21.4 from Aleksander's next
PPA. My SIM is a Verizon 4G LTE Cat M1 SIM Card from Nibelink
(https://nimbelink.com/Documentation/Sim_Cards/NL-SIM-VER-M1/1001410_NL-SIM-VER-M1_Datasheet.pdf)
and I've activated it with Nibelink.
While modemmanager is able to detect, enable, and successfully scan it
won't connect.
root@bionic-armhf:~# uname -r
4.15.0-36-generic
root@bionic-armhf:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS"
root@bionic-armhf:~# dpkg -s modemmanager | grep Version
Version: 1.9.0.next-20181010-1-0aleksander1
root@bionic-armhf:~# dpkg -s libqmi-utils | grep Version
Version: 1.21.4.next-20181010-1-0aleksander1
root@bionic-armhf:~# mmcli --list-modems
Found 1 modems:
/org/freedesktop/ModemManager1/Modem/0 [u-blox] SARA-R410M-52B
root@bionic-armhf:~# mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id
'9469a10655ec4f4d00c5ebad896376291d2a563b')
-------------------------
Hardware | manufacturer: 'u-blox'
| model: 'SARA-R410M-52B'
| revision: 'L0.0.00.00.06.05 1 [Aug 01 2018 14:05:07]'
| H/W revision: '10000'
| supported: 'lte'
| current: 'lte'
| equipment id: '357812090839082'
-------------------------
System | device:
'/sys/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.2/1-1.2.3'
| drivers: 'qmi_wwan, option1'
| plugin: 'Generic'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB1 (qcdm), ttyUSB2 (at), cdc-wdm0
(qmi), wwan0 (net)'
-------------------------
Numbers | own : 'unknown'
-------------------------
Status | lock: 'sim-pin2'
| unlock retries: 'sim-pin (3), sim-pin2 (3), sim-puk (10),
sim-puk2 (10)'
| state: 'disabled'
| power state: 'on'
| access tech: 'unknown'
| signal quality: '0' (cached)
-------------------------
Modes | supported: 'allowed: 4g; preferred: none'
| current: 'allowed: 4g; preferred: none'
-------------------------
Bands | supported: 'eutran-1, eutran-2, eutran-3, eutran-4,
eutran-5, eutran-8, eutran-12, eutran-13, eutran-17, eutran-18,
eutran-19, eutran-20, eutran-39'
| current: 'eutran-1, eutran-2, eutran-3, eutran-4,
eutran-5, eutran-8, eutran-12, eutran-13, eutran-17, eutran-18,
eutran-19, eutran-20, eutran-39'
-------------------------
IP | supported: 'ipv4, ipv6, ipv4v6'
-------------------------
3GPP | imei: '357812090839082'
| enabled locks: 'none'
| operator id: 'unknown'
| operator name: 'unknown'
| subscription: 'unknown'
| registration: 'unknown'
| EPS UE mode: 'csps-2'
| PCO: 'n/a'
-------------------------
SIM | path: '/org/freedesktop/ModemManager1/SIM/0'
-------------------------
Bearers | paths: 'none'
root@bionic-armhf:~# mmcli -m 0 --enable
successfully enabled the modem
root@bionic-armhf:~# mmcli --modem 0 --3gpp-scan --timeout=300
Found 3 networks:
311480 - 311 480 (lte, current)
313100 - 313 100 (lte, available)
310410 - 310 410 (lte, available)
root@bionic-armhf:~# mmcli --modem 0 --simple-connect="apn=vzwinternet"
Stopping ModemManager and using qmicli in every way I currently know
how yields this:
root@bionic-armhf:~# systemctl stop ModemManager
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --uim-get-card-status
[/dev/cdc-wdm0] Successfully got card status
Provisioning applications:
Primary GW: slot '0', application '2'
Primary 1X: session doesn't exist
Secondary GW: session doesn't exist
Secondary 1X: session doesn't exist
Card [0]:
Card state: 'present'
UPIN state: 'not-initialized'
UPIN retries: '0'
UPUK retries: '0'
Application [0]:
Application type: 'csim (4)'
Application state: 'detected'
Application ID:
A0:00:00:03:43:10:02:F3:10:FF:FF:89:02:00:00:FF
Personalization state: 'unknown'
UPIN replaces PIN1: 'no'
PIN1 state: 'not-initialized'
PIN1 retries: '0'
PUK1 retries: '0'
PIN2 state: 'not-initialized'
PIN2 retries: '0'
PUK2 retries: '0'
Application [1]:
Application type: 'isim (5)'
Application state: 'detected'
Application ID:
A0:00:00:00:87:10:04:F3:10:FF:FF:89:08:00:00:FF
Personalization state: 'unknown'
UPIN replaces PIN1: 'no'
PIN1 state: 'not-initialized'
PIN1 retries: '0'
PUK1 retries: '0'
PIN2 state: 'not-initialized'
PIN2 retries: '0'
PUK2 retries: '0'
Application [2]:
Application type: 'usim (2)'
Application state: 'ready'
Application ID:
A0:00:00:00:87:10:02:F3:10:FF:FF:89:08:00:00:FF
Personalization state: 'ready'
UPIN replaces PIN1: 'no'
PIN1 state: 'disabled'
PIN1 retries: '3'
PUK1 retries: '10'
PIN2 state: 'enabled-not-verified'
PIN2 retries: '3'
PUK2 retries: '10'
Application [3]:
Application type: 'unknown (0)'
Application state: 'detected'
Application ID:
A0:00:00:00:63:50:4B:43:53:2D:31:35
Personalization state: 'unknown'
UPIN replaces PIN1: 'no'
PIN1 state: 'not-initialized'
PIN1 retries: '0'
PUK1 retries: '0'
PIN2 state: 'not-initialized'
PIN2 retries: '0'
PUK2 retries: '0'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-signal-info
error: couldn't get signal info: QMI protocol error (74):
'InformationUnavailable'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-signal-strength
[/dev/cdc-wdm0] Successfully got signal strength
Current:
Network 'none': '-128 dBm'
RSSI:
Network 'none': '-128 dBm'
ECIO:
Network 'none': '-2.5 dBm'
IO: '-106 dBm'
SINR (8): '9.0 dB'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0
--nas-get-system-selection-preference
[/dev/cdc-wdm0] Successfully got system selection preference
Emergency mode: 'no'
Mode preference: 'lte'
Band preference: 'bc-0-a-system, bc-0-b-system, bc-1-all-blocks, bc-2,
bc-3-a-system, bc-4-all-blocks, bc-5-all-blocks, gsm-dcs-1800,
gsm-900-extended, gsm-900-primary, bc-6, bc-7, bc-8, bc-9, bc-10,
bc-11, gsm-450, gsm-480, gsm-750, gsm-850, gsm-900-railways,
gsm-pcs-1900, wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800,
wcdma-1700-us, wcdma-850-us, wcdma-800, bc-12, bc-14, bc-15,
wcdma-2600, wcdma-900, wcdma-1700-japan, bc-16, bc-17, bc-18, bc-19,
wcdma-850-japan, wcdma-1500'
LTE band preference: '1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
17, 18, 19, 20, 21, 24, 25, 26, 28, 29, 31, 33, 34, 35, 36, 37, 38,
39, 40, 41, 42, 43'
Network selection preference: 'automatic'
Service domain preference: 'cs-ps'
GSM/WCDMA acquisition order preference: 'gsm'
Acquisition order preference: none, none
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-operator-name
error: couldn't get operator name data: QMI protocol error (71):
'InvalidQmiCommand'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-serving-system
[/dev/cdc-wdm0] Successfully got serving system:
Registration state: 'not-registered-searching'
CS: 'detached'
PS: 'detached'
Selected network: 'unknown'
Radio interfaces: '1'
[0]: 'none'
Data service capabilities: '0'
Detailed status:
Status: 'none'
Capability: 'cs-ps'
HDR Status: 'none'
HDR Hybrid: 'no'
Forbidden: 'no'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-home-network
error: couldn't get home network: QMI protocol error (16): 'NotProvisioned'
root@bionic-armhf:~# qmicli -d /dev/cdc-wdm0 --nas-get-system-info
[/dev/cdc-wdm0] Successfully got system info:
LTE service:
Status: 'none'
True Status: 'none'
Preferred data path: 'no'
SIM reject info: 'available'
root@bionic-armhf:~# echo "APN=vzwinternet" > /etc/qmi-network.conf
root@bionic-armhf:~# echo "PROXY=yes" >> /etc/qmi-network.conf
root@bionic-armhf:~# qmi-network /dev/cdc-wdm0 start
Loading profile at /etc/qmi-network.conf...
APN: vzwinternet
APN user: unset
APN password: unset
qmi-proxy: yes
Checking data format with 'qmicli -d /dev/cdc-wdm0
--wda-get-data-format --device-open-proxy'...
Device link layer protocol retrieved: raw-ip
Getting expected data format with 'qmicli -d /dev/cdc-wdm0
--get-expected-data-format'...
Expected link layer protocol retrieved: raw-ip
Device and kernel link layer protocol match: raw-ip
Starting network with 'qmicli -d /dev/cdc-wdm0
--wds-start-network=apn='vzwinternet' --client-no-release-cid
--device-open-proxy'...
error: couldn't start network: QMI protocol error (14): 'CallFailed'
call end reason (3): generic-no-service
verbose call end reason (3,2001): [cm] no-service
Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 3)
error: network start failed, no packet data handle
Clearing state at /tmp/qmi-network-state-cdc-wdm0...
Seems like qmicli is telling me I'm not registered on a network so
perhaps a SIM/provisioning issue?
Regards,
Tim
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
