On Wed, 30 Jul 2008 00:26:37 +0100 "Jonathan Walmsley" <[EMAIL PROTECTED]> wrote:
> Hi all, > > This has been doing my nut for weeks. I have a Pinnacle miroDC30+ installed > on openSUSE 11.0. Each time I attempt to use the device I get various I/O > errors. dmesg tells me that there's no TV decoder loaded. I'm loading > using modprobe zr36067 and lsmod gives: It could be useful to know which kernel version you're running, too, and if it ever worked. The behavior of my test box changed with 2.6.26; PCI devices were detected in reverse order compared to 2.6.25. That actually improved my case somewhat, as my two conflicting cards suddenly conflicted a little bit less. In my case, I had two different video decoders on two different cards, but the i2c subsystem mixed them up because they listened to the same address, albeit on two different i2c buses. Whether that's what've bitten you or not, I don't know. /Sam ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
