On Thu, 16 Sep 2004 18:20:31 +0200
"Ronald S. Bultje" wrote:
RSB> Hi Andy,
RSB>
RSB> On Thu, 2004-09-16 at 10:29, Andy Brown wrote:
RSB> > Sep 16 09:02:35 geostat kernel: ZORAN: get_high_mem() - requested
RSB> > 4194304, avail 262144
RSB>
RSB> This suggests that the driver doesn't use bigphysarea. You have to
RSB> recompile the driver against the bigphysarea-patched kernel sources to
RSB> use bigphysarea in the kernel; did you do that?
RSB>
RSB> Ronald
Hi Guys, thanks for your two suggestions. I followed dmitriy kuvshinov
suggestions, and also recompiled to make sure, but i'm still getting
similar problems:
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: zoran_open(motion, pid=[2662]),
users(-)=0
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: dc10plus_init()
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: jpeg_codec_sleep() - sleep
GPIO=0x81008888
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: jpeg_codec_sleep() - wake GPIO=0x89008888
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: jpeg_codec_sleep() - wake GPIO=0xc9008888
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: jpeg_codec_sleep() - sleep
GPIO=0xc1008888
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: enable_jpg(IDLE)
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCGCAP
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCGCHAN - channel=1
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCSCHAN - channel=1, norm=0
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCGMBUF
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: mmap(V4L) of 0x403e9000-0x40429000
(size=262144)
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCMCAPTURE - frame=0, geom=768x576,
fmt=15
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: v4l_grab() - wrong bytes-per-pixel format
Sep 16 20:45:17 geostat motion: Failed with YUV420P, trying YUV422 palette
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCMCAPTURE - frame=0, geom=768x576,
fmt=7
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: v4l_set_format() - video buffer size
(128 kB) is too small
Sep 16 20:45:17 geostat motion: Failed with YUV422, trying RGB24 palette
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: VIDIOCMCAPTURE - frame=0, geom=768x576,
fmt=4
Sep 16 20:45:17 geostat kernel: DC10(new)[0]: v4l_set_format() - video buffer size
(128 kB) is too small
Sep 16 20:45:17 geostat motion: ioctl VIDIOCMCAPTURE: Invalid argument
But according to my kernel:
cat /proc/bigphysarea
Big physical area, size 16384 kB
free list: used list:
number of blocks: 1 0
size of largest block: 16384 kB 0 kB
total: 16384 kB 0 kB
So i'm still a bit stuck! I've set
bigpages=10MB mem=366M bigphysarea=4096
in my bootloader as suggested, but still not getting any further.
Any other ideas guys??
--
Andy Brown
<[EMAIL PROTECTED]> http://www.acomm-hosting.co.uk/
Web Design from £200 Hosting from £80 and domains only £20
ADSL for £20 per month at http://tinyurl.com/iyej
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
