Hallo Which LML33 do you have the original LML33 or the LML33R10 ?
The original LML33 has 2 Booktree/Coexant IC for en/decoding the video and the LML33R10 has a Philips IC for the decoding, and a Analog Devices for encoding the video. For the lml33 the steps by hand would look like that: <load the ic2 drivers before> insmod bt819 insmod bt856 insmod zr36060 insmod zr36067 For the lml33r10 insmod saa7114 insmod adv7170 and than like the original version. But I think that should be done by the module configuration file. Te set up what is needed and not. > Linux video capture interface: v1.00 > device class 'video4linux': registering > Linux video codec intermediate layer: v0.2 > bus type 'i2c' registered > bus i2c: add driver i2c_adapter > device class 'i2c-adapter': registering > Zoran MJPEG board driver version 0.9.5 > MJPEG[0]: Zoran ZR36067 (rev 2) irq: 9, memory: 0xdf004000 > MJPEG[0]: subsystem vendor=0xff10 id=0x9e80 > MJPEG[0]: find_zr36057() - unknown card > No known MJPEG cards found. > > With a 2.6.5 kernel what modules should I load for a LML33 card? > There is no zoran module. What has taken its place? > When I try to insert the zr36067 I get > > insmod /lib/modules/2.6.5/kernel/drivers/media/video/zr36067.ko > FATAL: Error inserting zr36067 > (/lib/modules/2.6.5/kernel/drivers/media/video/zr36067.ko): No such device > > but I can insert zr36060 I guess that you don't have loaded the other kernem modules. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
