Hi all,
I'm trying to create a mpeg with sound using mplex. The two
files I'm trying to combine is an mp2 and a SVCD (m2v) file
created by mpeg2enc.
The m2v file is created by catting 300 small m2v files
together, the command I used is:
jpeg2yuv -f 25 -j cS2300*.JPG -n 25 -I p | yuvscaler -O \
SVCD | mpeg2enc -T 120 -f 7 -o cS2300*.m2v
cat cS2300*.m2v > nosound.m2v
where * is in in the range 001 to 300.
Now I have an mp2 file that I want to add to the movie, so I did
the following:
mplex -f4 -o sound%d.mpg nosound.m2v somesound.mp2
The reason I specified sound%d.mpg is because if I don't, then
I'll get an error "**ERROR: [mplex] Need to split output but
there appears to be no %d in the filename pattern sound.mpg".
I'm using mjpegtools mplex version 1.6.1. Below is the exact
output of a sample run, it is abit verbose, but I thought I
should provide as much information as I could if I was to expect
any suggestions.
freebsd%>mplex -f4 -o sound%d.mpg /usr/tmp/nosound.m2v
~/kelly_red01.mp2
INFO: [mplex] mplex version 2.2.1 ($Date: 2002/02/04 19:06:14 $)
INFO: [mplex] File /usr/tmp/nosound.m2v looks like an MPEG Video stream.
INFO: [mplex] File /home/iceger/kelly_red01.mp2 looks like an MPEG Audio stream.
INFO: [mplex] Found 1 video streams 1 MPEG audio streams and 0 AC3 streams
INFO: [mplex] Selecting SVCD output profile
INFO: [mplex] Scanning for header info: Video stream e0 (/usr/tmp/nosound.m2v)
INFO: [mplex] VIDEO STREAM: e0
INFO: [mplex] Frame width : 480
INFO: [mplex] Frame height : 576
INFO: [mplex] Aspect ratio : 4:3 display
INFO: [mplex] Picture rate : 25.000 frames/sec
INFO: [mplex] Bit rate : 2500000 bits/sec
INFO: [mplex] Vbv buffer size : 225280 bytes
INFO: [mplex] CSPF : 0
INFO: [mplex] Scanning for header info: Audio stream c0
(/home/iceger/kelly_red01.mp2)
INFO: [mplex] AUDIO STREAM:
INFO: [mplex] Audio version : 1.0
INFO: [mplex] Layer : 3
INFO: [mplex] CRC checksums : no
INFO: [mplex] Bit rate : 16384 bytes/sec (128 kbit/sec)
INFO: [mplex] Frequency : 44100 Hz
INFO: [mplex] Mode : 0 stereo
INFO: [mplex] Mode extension : 0
INFO: [mplex] Copyright bit : 0 no copyright
INFO: [mplex] Original/Copy : 1 original
INFO: [mplex] Emphasis : 0 none
INFO: [mplex] SYSTEMS/PROGRAM stream:
INFO: [mplex] rough-guess multiplexed stream data rate : 2680400
INFO: [mplex] target data-rate specified : 2788800
INFO: [mplex] Setting specified specified data rate: 2788800
INFO: [mplex] Sectors = 78 Video delay = 46800 Audio delay = 46800
INFO: [mplex] Scanned to end AU 0
INFO: [mplex] Scanned to end AU 1
INFO: [mplex] Scanned to end AU 2
INFO: [mplex] Scanned to end AU 3
INFO: [mplex] Scanned to end AU 4
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 235520 frame=000000 sector=00000000
INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
INFO: [mplex] Video e0: buf= 233232 frame=000000 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
INFO: [mplex] Scanned to end AU 5
INFO: [mplex] Scanned to end AU 6
INFO: [mplex] Scanned to end AU 7
INFO: [mplex] Scanned to end AU 8
INFO: [mplex] Scanned to end AU 9
INFO: [mplex] Scanned to end AU 10
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 116334 frame=000001 sector=00000052
INFO: [mplex] Audio c0: buf= 1803 frame=000005 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000001 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000005 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000002 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000005 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000002 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000005 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000003 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000010 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000003 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000010 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000004 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000010 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000004 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000010 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000005 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000010 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000005 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000010 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000006 sector=00000053
INFO: [mplex] Audio c0: buf= 4088 frame=000011 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000006 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000011 sector=00000000
INFO: [mplex] Scanned to end AU 11
INFO: [mplex] Scanned to end AU 12
INFO: [mplex] Scanned to end AU 13
INFO: [mplex] Scanned to end AU 14
INFO: [mplex] Scanned to end AU 15
INFO: [mplex] Scanned to end AU 16
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000007 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000016 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000007 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000016 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000008 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000016 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000008 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000016 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000009 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000016 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000009 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000016 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000010 sector=00000053
INFO: [mplex] Audio c0: buf= 3884 frame=000017 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000010 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000017 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000011 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000022 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000011 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000022 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000012 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000022 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000012 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000022 sector=00000000
INFO: [mplex] Scanned to end AU 17
INFO: [mplex] Scanned to end AU 18
INFO: [mplex] Scanned to end AU 19
INFO: [mplex] Scanned to end AU 20
INFO: [mplex] Scanned to end AU 21
INFO: [mplex] Scanned to end AU 22
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000013 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000022 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000013 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000022 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000014 sector=00000053
INFO: [mplex] Audio c0: buf= 3884 frame=000023 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000014 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000023 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000015 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000028 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000015 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000028 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000016 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000028 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000016 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000028 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000017 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000028 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000017 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000028 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000018 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000033 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000018 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000033 sector=00000000
INFO: [mplex] Scanned to end AU 23
INFO: [mplex] Scanned to end AU 24
INFO: [mplex] Scanned to end AU 25
INFO: [mplex] Scanned to end AU 26
INFO: [mplex] Scanned to end AU 27
INFO: [mplex] Scanned to end AU 28
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000019 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000033 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000019 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000033 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000020 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000033 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000020 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000033 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000021 sector=00000053
INFO: [mplex] Audio c0: buf= 4091 frame=000034 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000021 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000034 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000022 sector=00000053
INFO: [mplex] Audio c0: buf= 1800 frame=000039 sector=00000001
INFO: [mplex] Video e0: buf= 233229 frame=000022 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000039 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000023 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000039 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000023 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000039 sector=00000000
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 114329 frame=000024 sector=00000053
INFO: [mplex] Audio c0: buf= 4096 frame=000039 sector=00000000
INFO: [mplex] Video e0: buf= 233229 frame=000024 sector=00000001
INFO: [mplex] Audio c0: buf= 4096 frame=000039 sector=00000000
INFO: [mplex] Scanned to end AU 29
INFO: [mplex] Scanned to end AU 30
INFO: [mplex] Scanned to end AU 31
INFO: [mplex] Scanned to end AU 32
INFO: [mplex] Scanned to end AU 33
**ERROR: [mplex] INTERNAL ERROR: additional data required but no free space in input
buffer
freebsd%> dmesg^M
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #14: Wed Aug 13 22:45:19 EST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FREEBSD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201314304 (196596K bytes)
config> en apm0
avail memory = 190054400 (185600K bytes)
Preloaded elf kernel "kernel" at 0xc0590000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc059009c.
Preloaded elf module "linux.ko" at 0xc05900ec.
Preloaded elf module "nvidia.ko" at 0xc059018c.
freebsd%> l /usr/tmp/nosound.m2v
244048 -rw-r--r-- 1 user group 249818880 Mar 1 20:29 /usr/tmp/nosound.m2v
freebsd%> l ~/kelly_red01.mp2
3744 -rw-r--r-- 1 user group 3801338 Feb 27 23:27 /home/iceger/kelly_red01.mp2
Although when I download mjpegtools, I downloaded the latest
version, but looking at the README in the mplex source
directory, it seems like that mplex code hasn't been updated
for a while now. Is there a patch somewhere? Any help would be
much appreciated.
Andrew
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
