Try using a script to load the modules in the proper order: first saa7110 and then zr36067. Ow, the zr36067 module says "Card not supported" and doesn't register any device with the card. Though I haven't worked on a Suse box, I had similar problems on RH. The usage count of saa7110 in the lsmod listing indicates that it is not being used.
Anoop -------------------------------------------------------------------- Nostalgia isn't what it used to be. On Thu, 2 Oct 2003, Kurt Kochendarfer wrote: >Date: Thu, 02 Oct 2003 07:50:31 -0700 >From: Kurt Kochendarfer <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: [Mjpeg-users] Unable to detect DC10+ > >Hello all, > >New to this list, so bear with the entry-level question, please. I have >a Pinnacle DC10+ capture card that I want to get working under SuSE 8.2, >(Yes, I know I should be using the kernel.org kernels, but I haven't >mastered compiling a kernel yet...) > >The problem is that I can get the system to load all the applicable >modules for the card, but it won't associate the modules with the card >(i.e. it won't detect the card.) I am running an ABIT NF-7S MB (nForce2 >chipset) with an Athlon XP 2700+ and 1 GB of RAM. > >uname -r yields the following: >2.4.20-4GB-athlon > >lsmod yields the following: >Module Size Used by Not tainted >zr36067 78128 0 (unused) >adv7175 3588 0 (unused) >saa7110 5540 0 (unused) >zoran 120512 0 (autoclean) (unused) >videocodec 5236 0 [zoran] >videodev 6176 0 [zr36067 zoran] >i2c-algo-bit 8392 0 [zoran] >i2c-old 4128 0 [zr36067] >i2c-core 15336 0 [adv7175 saa7110 zoran i2c-algo-bit] > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
