On Wed, Sep 17, 2003 at 06:30:15PM +0200, [EMAIL PROTECTED] wrote:
> It seems that the DC10 cannot properly handle smal fluctuations in the 5V
> line. This line can get polluted by other devices in your PC, especially
> by some graphic cards or the voltage regulators that feed your processor.
> You can try swapping PCI cards and see if this works. If it is your
> motherboard and you feel brave ;-) you can put an extra capacitator on the
> DC10+ board. This will filter the 5V analog line for the SAA7110 chip. You
> can find instructions how to do this on the Pinnacle forum. Just search
> for "diagonal lines" or "diagonal bands". It is not an easy job and your
> warranty is gone, but it really works.
Does anybody know where I can find those instructions ?
I have looked around and found nothing..
- Rķkharšur
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
