OK, I figured out the second problem - with two fields per image, the
vertical size should be _half_ the 'full' image size.
For the close problem, well, after running the app the first time, there
are a few messages, but nothing that would indicate a problem:
LML33[0]: zoran_close, record pid=[7243]
LML33[0]: enable_jpg IDLE
LML33[0]: zoran_close done
LML33[0]: zoran_close, record pid=[7243]
LML33[0]: enable_jpg IDLE
LML33[0]: interrupts received: GIRQ0:10 queue_state=0/0/4/89
LML33[0]: zoran_close done
I run the app again, get the error, and look with dmesg - and there are
no new messages there. No error is logged, in other words.
In a word: Huh?
On Fri, 2003-08-22 at 00:14, Ronald Bultje wrote:
> Hey Janne,
>
> On Thu, 2003-08-21 at 18:46, Janne wrote:
> > I am charging (well, limping) ahead somewhat fitfully with my capture
> > application. I now have two issues that are probably quite easy to
> > answer for people knowing more than me.
>
> For both questions, it's quite easy: load the module with debug=1 and
> look in your syslog ("dmesg") and you'll find the error there.
>
> Ronald
--
Trust the Computer. The Computer is your friend.
Tel. +46-046 222 8588 Dr. Janne Morén (mr)
Home: +46-046 211 4973 Dept. of Cognitive Science
Fax: +46-046 222 9758 Kungshuset, Lund
S-222 22 Lund, Sweden
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
