>I have an NTSC 30fps interlaced laserdisc with some footage which I am >told was originally 24fps. I have run lavrec, then yuvscaler -M >LINE_SWITCH and the result looks good, except frames 4/5 from each >sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and >this interlace effect is gone, but the 5th frame is an almost exact copy >of the 4th frame, so the motion seems to stutter. Is there anything >that can be done about this?
Read the manpage closer? "Input fps code must be 4(29.97fps), output fps code can be selected from 1(23.97fps) to 4(29.97fps). If 2, 3 or 4 selected, duplicated frames remain but their are also reverted to non-interlaced." Looks like you want "-F 1". (While we're on the topic, it seems to me that the "keep same frame rate" default is not a very good default behavior. If one is trying to reconstruct the original non-interlaced stream, I would think one would want the original frame rate, too, no?) -matt m. ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
