"Jacob D. Sheck" schrieb: > > This is what I did > > streamer -q -F mono16 -f mjpeg -n ntsc -r 23.976 -t 270 -o test.avi > lav2yuv +p test.avi | mpeg2enc -f 2 -F 1 -o test.m1v > > And I get it to Seg Fault Add to mpeg2enc the -F 1 (24000.0/1001.0 FPS) option.
The frame rate you use for recording it not a very common one. Can you record again with the typical 30000:1001 FPS (about 29,97) and see if it happens agin. > Berni asked for the INFO from mpeg2enc > I was not able to get this information. What option would tell me this? > I am using a localy compiled binary on my machine, with code from > mjpegtools-1.6.1 the machine is a Pentium 4 2.4. > > Berni also asked me to try "lav2yuv test.avi >/dev/null" > [EMAIL PROTECTED] tv]$ lav2yuv test.avi >/dev/null > **ERROR: [lav2yuv] File test.avi has 23.976216 frames/sec, choose norm > with +[np] param Please add there the +p option. This should work well. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
