Hallo > First of all, my setup. The computer is an Athlon XP 1800+ with an MSI > K7T266 Pro2 motherboard (i.e. a VIA KT266A chipset) and a gig of 266 MHz > DDRAM. My DVD writer is an HP dvd200i. I'm running Red Hat 7.3 and > mjpegtools 1.6.0. Am I correct if I say that the HP dvd200i is a DVD+R/RW writer ? If yes read the mjpeg-howto (on SF): Section Creating DVD's. There you find a nice example and a link to the DVD+RW/+R for Linux page. Or go directly there: http://fy.chalmers.se/~appro/linux/DVD+RW/, but you still should read the howto.
You should use that programms if you have a dvd+rw writer. > Here's a dumb question....I'm assuming that the > sequence-end/sequence-begin marks produced by mpeg2enc's -S option are > the same thing as chapter marks. Is that correct? Basically, yes. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
