Hello
I'm running openbsd 4.8 stable and am having timeout errors with alipm.
The machine hung during bootup and required a restart but it booted ok
after that and now prints messages to the console and slows down. I
checked out the stable branch just about right after installing it but
didn't notice this until after updating the kernel to stable...
It looks like there is a known bug with alipm in 4.0 for sparc64 but I
haven't found any mention of issues with i386. Should I just disable it
in my kernel and run without it? - will this negatively affect the
amount of energy the machine uses? I'm running this as a server/firewall
for a small apt and so it will be on 24/7... Any known fixes or workarounds?
Thanks
Niels
dmesg:
OpenBSD 4.8-stable (GENERIC) #0: Wed Feb 9 21:25:55 EST 2011
r...@perry.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2
cache) 1.35 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 536358912 (511MB)
avail mem = 517627904 (493MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/21/01, BIOS32 rev. 0 @ 0xf0ef0,
SMBIOS rev. 2.3 @ 0xf2ed0 (42 entries)
bios0: vendor Award Software, Inc. version "ASUS A7A266 ACPI BIOS
Revision 1002B" date 02/21/2001
bios0: ASUSTeK Computer INC. A7A266
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x17c2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf16f0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x4000! 0xd4000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1647 PCI" rev 0x04
aliagp0 at pchb0
agp0 at aliagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Acer Labs M5247 AGP/PCI-PC" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
version 1.0, legacy support
pciide0 at pci0 dev 4 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307075>
wd0: 16-sector PIO, LBA, 73308MB, 150136560 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD200BB-75DEA0>
wd1: 16-sector PIO, LBA, 19073MB, 39062500 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-716A, 1.06> ATAPI
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU1211, IYH1> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
cmpci0 at pci0 dev 5 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 9
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
ohci1 at pci0 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
version 1.0, legacy support
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
dc0 at pci0 dev 9 function 0 "ADMtek AN983" rev 0x11: irq 9, address
00:03:6d:20:3d:ac
acphy0 at dc0 phy 1: AC_UNKNOWN 10/100 PHY, rev. 0
xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: irq 5,
address 00:50:da:12:44:41
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 4
"TI TSB12LV23 FireWire" rev 0x00 at pci0 dev 11 function 0 not configured
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
lm1 at iic0 addr 0x2d: AS99127F rev 2
iic0: addr 0x2f d0=00 d1=00 d2=00 d3=00 d4=00 e0=00 e1=00 e2=00 e3=00
e4=00 e5=00 e6=00 e7=00 e8=00 e9=00 ea=00 eb=00 f6=f8 f7=10 words
00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff45 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Mouse"
rev 1.10/6.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
alipm0: timeout st 0x10<DONE>, resetting
alipm0: error st 0x24<IDLE,DEVERR>
alipm0: timeout st 0x8<BUSY>, resetting
alipm0: error st 0x24<IDLE,DEVERR>
alipm0: timeout st 0x10<DONE>, resetting
alipm0: error st 0x24<IDLE,DEVERR>
alipm0: timeout st 0x10<DONE>, resetting
alipm0: error st 0x24<IDLE,DEVERR>
alipm0: timeout st 0x10<DONE>, resetting
