Hi,
I've got a curious issue.
I have a simple ospf6d.conf as follows :
router-id 10.1.2.3
redistribute connected
redistribute static
router-priority
10
area 0.0.0.0 {
hello-interval 3
router-dead-time 15
interface bnx1
{passive}
interface vlan5 {metric 5}
interface lo2 {passive}
interface lo6
{passive}
}
The loopback and vlan interfaces get added to the RIB without
problem.
bnx1 does not get added to the RIB unless I remove the {passive}
statement, in
which case everything works fine.
All 4.7 errata have been
applied.
Has anyone come accross the same issue ?
Dmesg below.
Thanks
OpenBSD 4.7 (GENERIC.MP) #1: Fri Feb 11 22:42:45 UTC 2011
r...@example.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R)
Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 3747373056 (3573MB)
avail mem = 3647221760 (3478MB)
mainbus0
at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS
rev. 2.6 @ 0xdf7fe000 (127 entries)
bios0: vendor HP version
"P64" date 03/30/2010
bios0: HP ProLiant DL360 G6
acpi0 at bios0: rev 2
acpi0:
tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST
DMAR
SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545
Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr
0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0:
unknown i686 model 0x1a, can't get bus clock (0x0)
cpu0: apic clock running at
133MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R)
CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R)
CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R)
CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1
at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus
1 (IP2P)
acpiprt1 at acpi0: bus -1 (IPT1)
acpiprt2 at acpi0: bus 3 (PT01)
acpiprt3 at acpi0: bus 10 (PT02)
acpiprt4 at acpi0: bus 7 (PT03)
acpiprt5 at
acpi0: bus 11 (PT04)
acpiprt6 at acpi0: bus 12 (PT05)
acpiprt7 at acpi0: bus
13 (PT06)
acpiprt8 at acpi0: bus 14 (PT07)
acpiprt9 at acpi0: bus 2 (PT08)
acpiprt10 at acpi0: bus 4 (PT09)
acpiprt11 at acpi0: bus 15 (PT0A)
acpiprt12
at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C3, C1
acpicpu1 at acpi0: C3,
C3, C1
acpicpu2 at acpi0: C3, C3, C1
acpicpu3 at acpi0: C3, C3, C1
acpitz0 at
acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0xb000
0xcb000/0x3600! 0xce600/0x2c00! 0xd1200/0x4000
ipmi at mainbus0 not configured
cpu0: EST: PSS not yet available for this processor
pci0 at mainbus0 bus 0:
configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host"
rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0
bus 3
ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
apic 0
int 4 (irq 7)
ciss0: 1 LD, HW rev 2, FW 3.00/3.00, 64bit fifo rro
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL
VOLUME, 3.00> SCSI3 0/direct fixed
sd0: 69973MB, 512 bytes/sec, 143305920 sec
total
ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus
10
ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 7
em0 at pci3 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 0
int
0 (irq 7), address 00:15:17:ff:ff:ff
em1 at pci3 dev 0 function 1 "Intel
PRO/1000 PT (82571EB)" rev 0x06: apic 0 int
10 (irq 11), address
00:15:17:ff:ff:ff
ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
pci4
at ppb3 bus 11
ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13
pci5 at
ppb4 bus 12
ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13
pci6 at
ppb5 bus 13
ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
pci7 at
ppb6 bus 14
ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13
pci8 at
ppb7 bus 2
bnx0 at pci8 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0
int 7 (irq 7)
bnx1 at pci8 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic
0 int 15 (irq
11)
ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13
pci9 at ppb8 bus 4
ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13
pci10 at ppb9 bus 15
pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown
product 0x343a rev 0x13
pchb2 at pci0 dev 13 function 1 vendor "Intel",
unknown product 0x343b rev 0x13
pchb3 at pci0 dev 13 function 2 vendor
"Intel", unknown product 0x343c rev 0x13
pchb4 at pci0 dev 13 function 3
vendor "Intel", unknown product 0x343d rev 0x13
pchb5 at pci0 dev 13 function
4 "Intel 5520/X58 QuickPath" rev 0x13
pchb6 at pci0 dev 13 function 5 "Intel
5520 QuickPath" rev 0x13
pchb7 at pci0 dev 13 function 6 vendor "Intel",
unknown product 0x341a rev 0x13
pchb8 at pci0 dev 14 function 0 vendor
"Intel", unknown product 0x341c rev 0x13
pchb9 at pci0 dev 14 function 1
vendor "Intel", unknown product 0x341d rev 0x13
pchb10 at pci0 dev 14 function
2 vendor "Intel", unknown product 0x341e rev 0x13
pchb11 at pci0 dev 14
function 3 vendor "Intel", unknown product 0x341f rev 0x13
pchb12 at pci0 dev
14 function 4 vendor "Intel", unknown product 0x3439 rev 0x13
"Intel X58 Misc"
rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at
pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20
function 2 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB"
rev 0x00: apic 8 int 20 (irq
5)
uhci1 at pci0 dev 29 function 1 "Intel
82801JI USB" rev 0x00: apic 8 int 23 (irq
7)
uhci2 at pci0 dev 29 function 2
"Intel 82801JI USB" rev 0x00: apic 8 int 22 (irq
10)
uhci3 at pci0 dev 29
function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 23 (irq
7)
ehci0 at pci0
dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20 (irq
5)
usb0 at
ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr
1
ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci11 at
ppb10 bus 1
vga1 at pci11 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at
vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added
(80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 23 (irq 7)
drm0 at
radeondrm0
"Compaq iLO" rev 0x03 at pci11 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci11 dev 4 function 2 not configured
uhci4 at pci11
dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22
(irq 10)
"Hewlett-Packard IPMI" rev 0x00 at pci11 dev 4 function 6 not configured
usb1
at uhci4: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev
1.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel
0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using
apic 8 int 17 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide0 channel
0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:
<TEAC, DV-W28S-VS, G.V0> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO
mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel
UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at
usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision
1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3:
USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0
at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo
depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at
pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by
CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port
1 configuration 1 interface 0 "HP Virtual Keyboard" rev
1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country
code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1
port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev
1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
vscsi0
at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on
sd0b dump on sd0b
cpu2: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu3: unknown i686
model 0x1a, can't get bus clock (0x0)
bnx0: address 1c:c1:de:ff:ff:ff
brgphy0
at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address
1c:c1:de:ff:ff:ff
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
