Hi
I've bought a Dell R310 with H200 raid controller reported in dmesg as:
Symbios Logic SAS2008. It uses mpii driver and has two hard drives
configured in RAID 1.
I had a kernel crash while booting amd64-stable kernel.
System Event Log: E171F PCIe Fatal Error on Bus 0 Device 5 Function 0 -
it is RAID Controller.
It happened only once, I cant reproduce it.
Now it seems to work fine but i still have a problem with its
performance. Raid is fully initialized.
How can I help to resolve this problem?
I'm doing simple benchmark:
wget ftp.spline.de/pub/OpenBSD/4.8/sys.tar.gz
time tar xzf ./sys.tar.gz
On the same hardware Linux unpacks it in less then two seconds.
Numbers for OpenBSD:
4.8 amd64 sp: 3m40.95s real 0m0.65s user 0m0.71s system
4.8 amd64 mp-stable: 3m43.36s real 0m0.48s user 0m0.98s system
4.9 amd64 sp: 3m47.72s real 0m0.51s user 0m0.69s system
4.9 i386 rd : 3m45.11s real 0m1.03s user 0m1.19s system
While unpacking iostat -w 1 -c 10
4.8 amd64 sp:
tty sd0 cd0 cpu
tin tout KB/t t/s MB/s KB/t t/s MB/s us ni sy in id
2 470 16.79 105 1.72 0.00 0 0.00 0 0 1 0 99
0 0 17.26 153 2.59 0.00 0 0.00 0 0 0 0100
0 0 17.69 154 2.67 0.00 0 0.00 0 0 0 0100
0 0 17.46 157 2.68 0.00 0 0.00 0 0 1 0 99
0 0 18.66 150 2.74 0.00 0 0.00 0 0 1 0 99
0 0 18.53 153 2.78 0.00 0 0.00 0 0 1 0 99
0 0 20.07 166 3.26 0.00 0 0.00 1 0 0 0 99
0 0 16.56 161 2.61 0.00 0 0.00 0 0 0 0100
0 0 18.29 164 2.94 0.00 0 0.00 0 0 0 0100
0 0 16.34 163 2.61 0.00 0 0.00 0 0 1 0 99
4.8 amd64 mp-stable:
tty sd0 cd0 sd1 cpu
tin tout KB/t t/s MB/s KB/t t/s MB/s KB/t t/s MB/s us ni sy in id
0 4 16.42 1 0.02 0.00 0 0.00 1.17 0 0.00 0 0 0 0100
0 55 18.35 15 0.27 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 18.05 14 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 17.88 15 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 17.98 14 0.25 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 18.12 15 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 18.12 15 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 18.70 15 0.27 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 17.88 15 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
0 18 18.23 15 0.26 0.00 0 0.00 0.00 0 0.00 0 0 0 0100
4.9 amd64 sp:
tty sd0:a335ec15bd cd0: cpu
tin tout KB/t t/s MB/s KB/t t/s MB/s us ni sy in id
2 169 16.59 71 1.15 0.00 0 0.00 0 0 1 0 99
0 0 15.01 132 1.93 0.00 0 0.00 0 0 0 0100
0 0 12.66 126 1.55 0.00 0 0.00 0 0 0 0100
0 0 15.70 134 2.05 0.00 0 0.00 0 0 0 0100
0 0 21.10 209 4.30 0.00 0 0.00 2 0 3 0 95
0 0 14.12 135 1.86 0.00 0 0.00 0 0 0 0100
0 0 14.45 131 1.84 0.00 0 0.00 0 0 0 1 99
0 0 14.67 137 1.96 0.00 0 0.00 0 0 0 1 99
0 0 15.83 117 1.81 0.00 0 0.00 0 0 1 0 99
0 0 14.79 153 2.22 0.00 0 0.00 0 0 0 0100
# bioctl -ivh mpii0
Volume Status Size Device
mpii0 0 Online 232G RAID1
0 Online 233G 0:1.0 noencl <ATA WDC WD2502ABYS-1>
'WD-WCAT1H125700'
1 Online 233G 0:0.0 noencl <ATA WDC WD2502ABYS-1>
'WD-WCAT1H123678'
# pcidump -v
Domain /dev/pci0:
0:0:0: Intel Core DMI
0x0000: Vendor ID: 8086 Product ID: d130
0x0004: Command: 0000 Status ID: 0010
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
0x00e0: Capability 0x01: Power Management
0:3:0: Intel Core PCIE
0x0000: Vendor ID: 8086 Product ID: d138
0x0004: Command: 0147 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 4 Subordinate Bus: 4
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: d600 Memory Limit: d9f0
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Bridge Control: 0007
0x0040: Capability 0x0d: PCI-PCI
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 Gb/s Link Width: x4 / x8
0x00e0: Capability 0x01: Power Management
0:5:0: Intel Core PCIE
0x0000: Vendor ID: 8086 Product ID: d13a
0x0004: Command: 0147 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 5 Subordinate Bus: 5
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: f0 Secondary Status: 0000
0x0020: Memory Base: df10 Memory Limit: df20
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Bridge Control: 0007
0x0040: Capability 0x0d: PCI-PCI
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x10: PCI Express
Link Speed: 5.0 / 5.0 Gb/s Link Width: x8 / x8
0x00e0: Capability 0x01: Power Management
0:8:0: Intel Core Management
0x0000: Vendor ID: 8086 Product ID: d155
0x0004: Command: 0000 Status ID: 0010
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x10: PCI Express
0:8:1: Intel Core Scratch
0x0000: Vendor ID: 8086 Product ID: d156
0x0004: Command: 0000 Status ID: 0010
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x10: PCI Express
0:8:2: Intel Core Control
0x0000: Vendor ID: 8086 Product ID: d157
0x0004: Command: 0000 Status ID: 0010
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x10: PCI Express
0:8:3: Intel Core Misc
0x0000: Vendor ID: 8086 Product ID: d158
0x0004: Command: 0000 Status ID: 0000
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:16:0: Intel Core QPI Link
0x0000: Vendor ID: 8086 Product ID: d150
0x0004: Command: 0000 Status ID: 0000
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:16:1: Intel Core QPI Routing
0x0000: Vendor ID: 8086 Product ID: d151
0x0004: Command: 0000 Status ID: 0000
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:26:0: Intel 3400 USB
0x0000: Vendor ID: 8086 Product ID: 3b3c
0x0004: Command: 0146 Status ID: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdf0fc000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0e Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: Reserved
0:28:0: Intel 3400 PCIE
0x0000: Vendor ID: 8086 Product ID: 3b42
0x0004: Command: 0147 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 05
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: fff0 Memory Limit: 0000
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 0007
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x0 / x4
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:4: Intel 3400 PCIE
0x0000: Vendor ID: 8086 Product ID: 3b4a
0x0004: Command: 0147 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 05
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: da00 Memory Limit: ddf0
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 0007
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:29:0: Intel 3400 USB
0x0000: Vendor ID: 8086 Product ID: 3b34
0x0004: Command: 0146 Status ID: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdf0fe000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0e Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: Reserved
0:30:0: Intel 82801BA Hub-to-PCI
0x0000: Vendor ID: 8086 Product ID: 244e
0x0004: Command: 0147 Status ID: 0010
0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: a5
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line
Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 20
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2280
0x0020: Memory Base: de00 Memory Limit: def0
0x0024: Prefetch Memory Base: d581 Prefetch Memory Limit: d5f1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 000b
0x0050: Capability 0x0d: PCI-PCI
0:31:0: Intel 3420 LPC
0x0000: Vendor ID: 8086 Product ID: 3b14
0x0004: Command: 0147 Status ID: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 05
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:2: Intel 3400 SATA
0x0000: Vendor ID: 8086 Product ID: 3b20
0x0004: Command: 0047 Status ID: 02b0
0x0008: Class: 01 Subclass: 01 Interface: 8f Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR io addr: 0x0000eca0
0x0014: BAR io addr: 0x0000ec90
0x0018: BAR io addr: 0x0000eca8
0x001c: BAR io addr: 0x0000ec94
0x0020: BAR io addr: 0x0000ecc0
0x0024: BAR io addr: 0x0000ecd0
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0x00b0: Capability 0x13: Reserved
0:31:5: Intel 3400 SATA
0x0000: Vendor ID: 8086 Product ID: 3b26
0x0004: Command: 0045 Status ID: 02b0
0x0008: Class: 01 Subclass: 01 Interface: 85 Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR io addr: 0x0000ecb0
0x0014: BAR io addr: 0x0000ec98
0x0018: BAR io addr: 0x0000ecb8
0x001c: BAR io addr: 0x0000ec9c
0x0020: BAR io addr: 0x0000ece0
0x0024: BAR io addr: 0x0000ecf0
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0x00b0: Capability 0x13: Reserved
1:3:0: Matrox MGA G200eW
0x0000: Vendor ID: 102b Product ID: 0532
0x0004: Command: 0007 Status ID: 0290
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 0a
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line
Size: 10
0x0010: BAR mem prefetchable 32bit addr: 0xd5800000
0x0014: BAR mem 32bit addr: 0xde7fc000
0x0018: BAR mem 32bit addr: 0xde800000
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 06 Min Gnt: 10 Max Lat: 20
0x00dc: Capability 0x01: Power Management
2:0:0: Broadcom BCM5716
0x0000: Vendor ID: 14e4 Product ID: 163b
0x0004: Command: 0006 Status ID: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 20
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR mem 64bit addr: 0x00000000da000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0f Min Gnt: 00 Max Lat: 00
0x0048: Capability 0x01: Power Management
0x0050: Capability 0x03: Vital Product Data (VPD)
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x00a0: Capability 0x11: Extended Message Signaled Interrupts
(MSI-X)
0x00ac: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
2:0:1: Broadcom BCM5716
0x0000: Vendor ID: 14e4 Product ID: 163b
0x0004: Command: 0006 Status ID: 0018
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 20
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR mem 64bit addr: 0x00000000dc000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 02a3
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 05 Min Gnt: 00 Max Lat: 00
0x0048: Capability 0x01: Power Management
0x0050: Capability 0x03: Vital Product Data (VPD)
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x00a0: Capability 0x11: Extended Message Signaled Interrupts
(MSI-X)
0x00ac: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
4:0:0: Broadcom BCM5709
0x0000: Vendor ID: 14e4 Product ID: 1639
0x0004: Command: 0006 Status ID: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 20
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR mem 64bit addr: 0x00000000d6000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 14e4 Product ID: 0907
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0f Min Gnt: 00 Max Lat: 00
0x0048: Capability 0x01: Power Management
0x0050: Capability 0x03: Vital Product Data (VPD)
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x00a0: Capability 0x11: Extended Message Signaled Interrupts
(MSI-X)
0x00ac: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
4:0:1: Broadcom BCM5709
0x0000: Vendor ID: 14e4 Product ID: 1639
0x0004: Command: 0006 Status ID: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 20
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR mem 64bit addr: 0x00000000d8000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 14e4 Product ID: 0907
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 05 Min Gnt: 00 Max Lat: 00
0x0048: Capability 0x01: Power Management
0x0050: Capability 0x03: Vital Product Data (VPD)
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x00a0: Capability 0x11: Extended Message Signaled Interrupts
(MSI-X)
0x00ac: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 Gb/s Link Width: x4 / x4
5:0:0: Symbios Logic SAS2008
0x0000: Vendor ID: 1000 Product ID: 0072
0x0004: Command: 0007 Status ID: 0010
0x0008: Class: 01 Subclass: 07 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 10
0x0010: BAR io addr: 0x0000fc00
0x0014: BAR mem 64bit addr: 0x00000000df2b0000
0x001c: BAR mem 64bit addr: 0x00000000df2c0000
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1028 Product ID: 1f1d
0x0030: Expansion ROM Base Address: df100000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0f Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0068: Capability 0x10: PCI Express
Link Speed: 5.0 / 5.0 Gb/s Link Width: x8 / x8
0x00d0: Capability 0x03: Vital Product Data (VPD)
0x00a8: Capability 0x05: Message Signaled Interrupts (MSI)
0x00c0: Capability 0x11: Extended Message Signaled Interrupts
(MSI-X)
Dmesgs:
OpenBSD 4.8 (GENERIC) #182: Mon Aug 16 09:02:40 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3210317824 (3061MB)
avail mem = 3111067648 (2966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf79c000 (66 entries)
bios0: vendor Dell Inc. version "1.5.3" date 12/08/2010
bios0: Dell Inc. PowerEdge R310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2793.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (LYD0)
acpiprt2 at acpi0: bus 5 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 3 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus 1 (COMP)
acpicpu0 at acpi0: C3, C1
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci1 at ppb0 bus 4
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 16
(irq 15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int 17
(irq 5)
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci2 at ppb1 bus 5
mpii0 at pci2 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 0
int 16 (irq 15)
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct
fixed
sd0: 237824MB, 512 bytes/sec, 487063552 sec total
ses0 at scsibus0 targ 10 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed
ses0: unable to read enclosure configuration
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 2
bnx2 at pci4 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
(irq 15)
bnx3 at pci4 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
(irq 5)
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 1
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633C, D250> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub4 at uhub3 port 1 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 3
uhidev0 at uhub4 port 2 configuration 1 interface 0 "LITEON Technology
USB Multimedia Keyboard" rev 1.10/1.01 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 00:10:18:77:d4:28
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:10:18:77:d4:2a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 84:2b:2b:50:57:6d
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 84:2b:2b:50:57:6e
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
OpenBSD 4.8 (GENERIC.MP) #0: Fri Jan 21 16:59:02 CET 2011
root@xxx:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3210317824 (3061MB)
avail mem = 3111043072 (2966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf79c000 (66 entries)
bios0: vendor Dell Inc. version "1.5.3" date 12/08/2010
bios0: Dell Inc. PowerEdge R310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2793.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu4: 256KB 64b/line 8-way L2 cache
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu5: 256KB 64b/line 8-way L2 cache
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu6: 256KB 64b/line 8-way L2 cache
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2792.98 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu7: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (LYD0)
acpiprt2 at acpi0: bus 5 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 3 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus 1 (COMP)
acpicpu0 at acpi0: C3, C1
acpicpu1 at acpi0: C3, C1
acpicpu2 at acpi0: C3, C1
acpicpu3 at acpi0: C3, C1
acpicpu4 at acpi0: C3, C1
acpicpu5 at acpi0: C3, C1
acpicpu6 at acpi0: C3, C1
acpicpu7 at acpi0: C3, C1
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci1 at ppb0 bus 4
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 16
(irq 15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int 17
(irq 5)
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci2 at ppb1 bus 5
mpii0 at pci2 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 0
int 16 (irq 15)
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct
fixed
sd0: 237824MB, 512 bytes/sec, 487063552 sec total
ses0 at scsibus0 targ 10 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed
ses0: unable to read enclosure configuration
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 2
bnx2 at pci4 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
(irq 15)
bnx3 at pci4 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
(irq 5)
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 1
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
Data modified on freelist: word 4 of object 0xffff800000128380 size 0x48
previous type ACPI (0xd != 0xdeadbeef)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633C, D250> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "JetFlash Mass
Storage Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <JetFlash, Transcend 2GB, 8.07> SCSI2
0/direct removable
sd1: 1926MB, 512 bytes/sec, 3944448 sec total
uhub4 at uhub3 port 1 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 3
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Raptor Gaming
PS/2+USB Mouse" rev 1.10/22.70 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 2 configuration 1 interface 0 "LITEON Technology
USB Multimedia Keyboard" rev 1.10/1.01 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 00:10:18:77:d4:28
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:10:18:77:d4:2a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 84:2b:2b:50:57:6d
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 84:2b:2b:50:57:6e
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
wskbd0: disconnecting from wsdisplay0
wskbd0 detached
ukbd0 detached
uhidev1 detached
wsmouse0 detached
ums0 detached
uhidev0 detached
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
This happened after removing a pendrive. How can I help to fix that?
# usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 addr 3: high speed, self powered, config 1, product
0x2514(0x2514), Standard Microsystems(0x0424), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 2 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
getdevicedesc: ioctl: Input/output error
port 2 addr 3: high speed, power 100 mA, config 1, product
0x6387(0x6387), Alcor Micro(0x058f), rev 1.00
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
OpenBSD 4.9-beta (GENERIC) #457: Mon Feb 7 11:56:10 MST 2011
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3210317824 (3061MB)
avail mem = 3110871040 (2966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf79c000 (66 entries)
bios0: vendor Dell Inc. version "1.5.3" date 12/08/2010
bios0: Dell Inc. PowerEdge R310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz, 2793.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (LYD0)
acpiprt2 at acpi0: bus 5 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 3 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus 1 (COMP)
acpicpu0 at acpi0: C3, C1
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci1 at ppb0 bus 4
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 16
(irq 15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int 17
(irq 5)
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci2 at ppb1 bus 5
mpii0 at pci2 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 0
int 16 (irq 15)
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct
fixed
sd0: 237824MB, 512 bytes/sec, 487063552 sec total
ses0 at scsibus0 targ 10 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed
ses0: unable to read enclosure configuration
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 2
bnx2 at pci4 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
(irq 15)
bnx3 at pci4 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
(irq 5)
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 1
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633C, D250> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 1 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 3
uhidev0 at uhub3 port 2 configuration 1 interface 0 "LITEON Technology
USB Multimedia Keyboard" rev 1.10/1.01 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 00:10:18:77:d4:28
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:10:18:77:d4:2a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 84:2b:2b:50:57:6d
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 84:2b:2b:50:57:6e
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
OpenBSD 4.9-beta (RAMDISK_CD) #310: Mon Feb 7 12:38:19 MST 2011
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class)
2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT
real mem = 3210932224 (3062MB)
avail mem = 3151450112 (3005MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/08/10, BIOS32 rev. 0 @ 0xf9ea0,
SMBIOS rev. 2.6 @ 0xbf79c000 (66 entries)
bios0: vendor Dell Inc. version "1.5.3" date 12/08/2010
bios0: Dell Inc. PowerEdge R310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ TCPA SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (LYD0)
acpiprt2 at acpi0: bus 5 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 3 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus 1 (COMP)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xec000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci1 at ppb0 bus 4
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 16
(irq 15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int 17
(irq 5)
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 0 int 16
(irq 0)
pci2 at ppb1 bus 5
mpii0 at pci2 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 0
int 16 (irq 15)
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct
fixed
sd0: 237824MB, 512 bytes/sec, 487063552 sec total
scsibus0 targ 10 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed not configured
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 2
bnx2 at pci4 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
(irq 15)
bnx3 at pci4 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
(irq 5)
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
(irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 1
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633C, D250> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3872 blocks
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 1 "vendor 0x0424 product 0x2514" rev 2.00/0.00 addr 3
uhidev0 at uhub3 port 2 configuration 1 interface 0 "LITEON Technology
USB Multimedia Keyboard" rev 1.10/1.01 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhub4 at uhub1 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
bnx0: address 00:10:18:77:d4:28
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:10:18:77:d4:2a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 84:2b:2b:50:57:6d
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 84:2b:2b:50:57:6e
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
Lukasz Czarniecki
