Hey there all on the misc,
I am having problems booting into bsd.rd on my machine. Currently the
machine holds OpenBSD 4.4 Generic and is working fine. But now I've decided
to upgrade it (I will be doing a clean install) to version 4.8. So I've
downloaded bsd.rd (4.8) into the machine and tried to boot into it, but the
machine restarts itself in the middle of booting it. Can someone please
point me into the right direction how can I resolve this?
Here is the dmesg from it running 4.4:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
cpu0: F00F bug workaround installed
real mem = 33124352 (31MB)
avail mem = 22044672 (21MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/96, BIOS32 rev. 0 @ 0xf7318
pcibios0 at bios0: rev 2.1 @ 0xf7270/0x960
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
vendor "Siemens", unknown product 0x0005 (class undefined unknown subclass
0x00, rev 0x01) at pci0 dev 3 function 0 not conf
igured
vendor "Siemens", unknown product 0x0005 (class undefined unknown subclass
0x00, rev 0x01) at pci0 dev 3 function 1 not conf
igured
pcib0 at pci0 dev 7 function 0 "Intel 82371SB ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
0 wired to compatibility, channel 1 wired to com
patibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00JJC0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371SB USB" rev 0x01: irq 9
vga1 at pci0 dev 8 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
bce0 at pci0 dev 18 function 0 "Broadcom BCM4401" rev 0x01: irq 11, address
00:aa:bc:00:4e:01
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:e0:4c:14:e5:dc
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f3e5 netmask ffe5 ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
